Anonymous
Apr 10, 2026
Rating: 5/5
Reliable connectivity
Using this for a home automation sensor. Bluetooth 5.3 range is impressive compared to older ESP32 models.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Chip Model | ESP32-C6-WROOM-1-N8 |
| CPU Architecture | 32-bit RISC-V |
| Flash Memory | 8MB |
| Wi-Fi Standard | 802.11ax (Wi-Fi 6) |
| Bluetooth Version | 5.3 (Low Energy) |
| Logic Voltage | 3.3V |
| Input Voltage | 5V via USB-C |
| GPIO Count | 22 Programmable Pins |
| Dimensions | 25.4 x 17.8 mm |
| Weight | 3.5g |
Anonymous
Apr 10, 2026
Rating: 5/5
Reliable connectivity
Using this for a home automation sensor. Bluetooth 5.3 range is impressive compared to older ESP32 models.
Anonymous
Mar 27, 2026
Rating: 5/5
Perfect for RISC-V learning
Love the RISC-V architecture. Compiles fast and runs cool. Waveshare quality is consistent.
Anonymous
Mar 20, 2026
Rating: 4/5
Great hardware, docs need work
The board itself is fantastic and low power. However, finding specific pinout diagrams took some digging.
Anonymous
Mar 16, 2026
Rating: 5/5
Excellent Wi-Fi 6 Support
Finally a board that supports Wi-Fi 6 out of the box. Setup was smooth using the ESP-IDF.
Anonymous
Feb 16, 2026
Rating: 4/5
Good value for money
Works well with Arduino IDE once you install the right board manager. Slightly tricky for beginners but worth it.
Q: Does it support MicroPython?
A: Yes, MicroPython and CircuitPython are both supported on the ESP32-C6 chip.
Q: Does it have an external antenna connector?
A: This model uses an onboard PCB antenna. For external antenna options, please check our U.FL variant.
Q: Is this compatible with Arduino IDE?
A: Yes, it is fully compatible with Arduino IDE after installing the ESP32 board package.
Q: What is the maximum current draw?
A: Peak current can reach up to 350mA during Wi-Fi transmission. Ensure your power supply can handle this.
Q: Can I use 5V sensors directly?
A: No, the GPIOs are 3.3V logic. You will need a level shifter for 5V sensors to avoid damage.