Anonymous
Feb 27, 2026
Rating: 5/5
Perfect for learning
This board is exactly what I needed to start my electronics journey. It connects easily and runs sketches without issues.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller Unit | ATmega328P |
| Operating Voltage | 5V DC |
| Input Voltage (Recommended) | 7-12V DC |
| Digital I/O Pins | 14 |
| PWM Channels | 6 |
| Analog Input Pins | 6 |
| DC Current per I/O Pin | 20 mA |
| Flash Memory | 32 KB |
| SRAM | 2 KB |
| Clock Speed | 16 MHz |
Anonymous
Feb 27, 2026
Rating: 5/5
Perfect for learning
This board is exactly what I needed to start my electronics journey. It connects easily and runs sketches without issues.
Anonymous
Feb 14, 2026
Rating: 5/5
Great quality
Solid construction and works well with all my sensors. The pin headers are pre-soldered which saved me time.
Anonymous
Feb 12, 2026
Rating: 5/5
Fast shipping
Arrived quickly and tested successfully. I am using it for a school science project and it performs reliably.
Anonymous
Feb 01, 2026
Rating: 5/5
Highly recommend
Using it for my home automation project. The compatibility with existing libraries is seamless.
Anonymous
Jan 28, 2026
Rating: 4/5
Good value
Works fine for most projects but documentation was thin. Had to look up driver details online separately.
Q: Does this work with Arduino IDE?
A: Yes, fully compatible with Arduino IDE. You can select Arduino UNO from the board menu.
Q: What driver do I need?
A: Depends on the chip, usually CH340 or FT232. Drivers are available on our support page.
Q: Is the pinout standard?
A: Yes, it follows standard UNO R3 layout so most shields will fit directly.
Q: Can I use 3.3V sensors?
A: Yes, but logic level is 5V. Please use a logic level converter for sensitive 3.3V components.
Q: Is a USB cable included?
A: No, please purchase a USB Type-B cable separately as it is not included in this kit.