Anonymous
Apr 12, 2026
Rating: 5/5
Excellent for Industrial Automation
Used this for a factory monitoring project. The dual CAN bus works flawlessly and the RS485 integration saved me a lot of wiring time. Highly recommended for control systems.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | STM32F407ZGT6 |
| CPU Core | ARM Cortex-M4 |
| Max Frequency | 168 MHz |
| Flash Memory | 1024 KB |
| SRAM | 192 KB |
| Communication Ports | Dual CAN, Dual RS232, RS485 |
| Wireless Connectivity | Wi-Fi & Bluetooth 4.0 |
| Input Voltage | 5V DC via USB or Terminal |
| Operating Temperature | -40°C to 85°C |
| Debug Interface | SWD and JTAG |
Anonymous
Apr 12, 2026
Rating: 5/5
Excellent for Industrial Automation
Used this for a factory monitoring project. The dual CAN bus works flawlessly and the RS485 integration saved me a lot of wiring time. Highly recommended for control systems.
Anonymous
Apr 10, 2026
Rating: 4/5
Good Value for Money
Compared to other boards, this offers more interfaces out of the box. The only downside is the size, it is slightly larger than standard Nucleo boards.
Anonymous
Mar 31, 2026
Rating: 5/5
Perfect STM32F407 Implementation
All pins are accessible. RS485 conversion is stable even under noise. The Bluetooth module pairs quickly with my phone for debugging parameters.
Anonymous
Mar 30, 2026
Rating: 4/5
Great Hardware, Average Docs
Board quality is top notch and all pins are labeled clearly. Wi-Fi setup required some digging into the example code, but once configured, it is very stable.
Anonymous
Mar 04, 2026
Rating: 5/5
Reliable Control Board
Been running for 2 weeks straight without issues in a prototype environment. Power regulation seems robust and the board stays cool.
Q: What is the current limit on the 3.3V pin?
A: The onboard regulator can supply approximately 500mA on the 3.3V rail. Please do not exceed this to avoid damaging the board.
Q: Can I power it via RS232 port?
A: No, please do not attempt to power the board via the RS232 port. Use the USB port or the 5V screw terminal block for power supply.
Q: Are CAN termination resistors included?
A: Yes, there are jumpers on the PCB that allow you to enable or disable the 120-ohm termination resistors for each CAN bus.
Q: Is the Wi-Fi module onboard or external?
A: The Wi-Fi module is integrated onboard. It communicates via UART and comes with pre-flashed firmware for easy AT command usage.
Q: Does this board support STM32CubeIDE?
A: Yes, the board is fully compatible with STM32CubeIDE and Keil MDK. You can download the standard STM32F407 support packages.