Anonymous
Apr 01, 2026
Rating: 4/5
Good board, missing headers
Quality is great but you need to buy pin headers separately.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| MCU Model | STM32F407ZGT6 |
| Core Architecture | ARM Cortex-M4F |
| Max Clock Speed | 168 MHz |
| Flash Memory | 1024 KB |
| SRAM | 192 KB |
| Input Voltage | 5V DC |
| I/O Voltage | 3.3V TTL |
| Debug Interface | SWD, JTAG |
| USB Type | Micro USB OTG |
| Board Size | 55 x 80 mm |
Anonymous
Apr 01, 2026
Rating: 4/5
Good board, missing headers
Quality is great but you need to buy pin headers separately.
Anonymous
Mar 15, 2026
Rating: 5/5
Fast performance
168MHz is plenty for my signal processing needs. Good pin layout.
Anonymous
Mar 11, 2026
Rating: 5/5
Works with CubeIDE
Setup was straightforward. Drivers installed easily on Windows.
Anonymous
Feb 15, 2026
Rating: 5/5
Reliable power supply
Tested under load and voltage remained stable. Recommended.
Anonymous
Feb 10, 2026
Rating: 5/5
Excellent for prototyping
Used this for a motor control project. The PWM outputs are very stable.
Q: Does it support FreeRTOS?
A: Yes, it is fully compatible with FreeRTOS kernel.
Q: Is schematic available?
A: Yes, you can download the schematic from our product wiki page.
Q: Is CH340 driver needed?
A: Yes, please install the CH340 USB driver for serial communication.
Q: Can I use 3.3V logic sensors?
A: Yes, all GPIO pins operate at 3.3V logic level.
Q: What is the current limit?
A: The onboard regulator supports up to 500mA output.