Anonymous
Mar 30, 2026
Rating: 5/5
Fast delivery and good packaging
No bent pins. Tested GPIO and UART, all functional.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller Model | STM32H723ZGT6 |
| CPU Architecture | Arm Cortex-M7 |
| Max Frequency | 550 MHz |
| Flash Memory | 1 MB |
| SRAM Capacity | 564 KB |
| Operating Voltage | 3.3V |
| Debug Interface | SWD/JTAG |
| USB Support | OTG FS/HS |
| Board Dimensions | 55 x 45 mm |
| Package Weight | 25g |
Anonymous
Mar 30, 2026
Rating: 5/5
Fast delivery and good packaging
No bent pins. Tested GPIO and UART, all functional.
Anonymous
Mar 30, 2026
Rating: 5/5
Solid build quality
Pins are well labeled. Bootloader works out of the box.
Anonymous
Mar 18, 2026
Rating: 5/5
Excellent STM32H7 option
Much cheaper than Nucleo boards with similar specs. Recommended.
Anonymous
Mar 12, 2026
Rating: 4/5
Good learning board
Documentation could be better, but hardware is excellent for the price.
Anonymous
Jan 20, 2026
Rating: 5/5
Great for high-speed projects
Works perfectly with CubeIDE. The H723 is a beast for signal processing.
Q: Is 5V tolerant?
A: Most GPIOs are 3.3V only, check the datasheet for FT marks.
Q: Does this support Arduino IDE?
A: Yes, you can use the STM32duino package.
Q: Can it drive stepper motors directly?
A: No, you need a driver module like A4988 or TMC2208.
Q: Does it come with headers soldered?
A: No, headers are not included to save shipping space.
Q: What debugger is compatible?
A: ST-Link V2 or V3 is recommended.