Anonymous
Apr 11, 2026
Rating: 4/5
Good sensor, short cables
The sensor itself is accurate, but I wish the connecting wires were a bit longer for my specific project enclosure.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Brand | Youxin Electronics |
| Model Number | YX-NTC-10K |
| Sensor Type | NTC Thermistor |
| Resistance Value | 10kΩ at 25°C |
| Temperature Range | -40°C to 125°C |
| Accuracy | ±1% Resistance Tolerance |
| Operating Voltage | 3.3V - 5V DC |
| Output Signal | Analog Voltage |
| PCB Material | FR-4 Flame Retardant |
| Warranty Period | 12 Months |
Anonymous
Apr 11, 2026
Rating: 4/5
Good sensor, short cables
The sensor itself is accurate, but I wish the connecting wires were a bit longer for my specific project enclosure.
Anonymous
Mar 17, 2026
Rating: 5/5
Perfect for DIY Electronics
This module works flawlessly with my Arduino setup. The readings are stable and consistent. Great value for the price.
Anonymous
Mar 16, 2026
Rating: 3/5
Packaging could be better
The product works fine, but the box was slightly damaged during shipping. The module was secure though.
Anonymous
Mar 09, 2026
Rating: 5/5
Reliable Vehicle Accessory
Using this to monitor engine bay temperature. It handles the heat well and provides accurate data to my dashboard display.
Anonymous
Feb 27, 2026
Rating: 5/5
Highly Recommended
Easy to integrate and very responsive. Youxin Electronics delivered a quality component as described.
Q: What is the maximum current draw?
A: The module consumes less than 5mA during normal operation, making it suitable for battery-powered projects.
Q: Can I connect this directly to a Raspberry Pi?
A: Yes, but you will need an ADC converter since Raspberry Pi GPIO pins do not support analog input directly.
Q: Does this require calibration before use?
A: The module comes pre-calibrated from the factory, but you can perform software calibration for higher precision.
Q: What is the length of the sensor wires?
A: The standard wire length included with the module is approximately 20 centimeters.
Q: Is this module waterproof for outdoor use?
A: No, this module is not waterproof. We recommend using a protective enclosure if used outdoors.