Anonymous
Apr 01, 2026
Rating: 5/5
Highly recommended
Great for environmental monitoring stations. Low power consumption is a plus.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Output Protocol | RS-485 Modbus RTU |
| Wind Speed Range | 0 to 30 m/s |
| Measurement Accuracy | ±0.3 m/s |
| Operating Temperature | -20°C to 60°C |
| Power Supply Voltage | 12V DC |
| Housing Material | ABS + Aluminum Alloy |
| Protection Level | IP54 |
| Response Time | ≤ 0.5 Seconds |
| Product Size | 85 x 45 x 30 mm |
| Cable Length | 1.5 Meters |
Anonymous
Apr 01, 2026
Rating: 5/5
Highly recommended
Great for environmental monitoring stations. Low power consumption is a plus.
Anonymous
Mar 12, 2026
Rating: 4/5
Good value
Sensor works well once installed. Wiring diagram was slightly confusing but support helped.
Anonymous
Mar 01, 2026
Rating: 5/5
Accurate and compact
Fits where larger sensors couldn't. Readings match our calibrated reference instrument.
Anonymous
Feb 16, 2026
Rating: 5/5
Excellent for industrial use
Works perfectly with our SCADA system. The RS-485 output is stable and noise-resistant.
Anonymous
Feb 04, 2026
Rating: 5/5
Stable readings
No drift observed after 2 months of continuous operation in a ventilation duct.
Q: Does this work with Arduino?
A: Yes, you can interface it using an RS-485 to TTL shield module.
Q: Is configuration software included?
A: Yes, a basic configuration tool is available for download on our website.
Q: What is the maximum cable length?
A: RS-485 supports up to 1200 meters depending on baud rate and environment.
Q: Is it fully waterproof?
A: It has an IP54 rating, so it is rain resistant but not suitable for submersion.
Q: Does it come with a calibration certificate?
A: Yes, a factory calibration report is included in the package.