Anonymous
Apr 13, 2026
Rating: 3/5
Okay for the price
Works but sensitivity varies with humidity. Good for indoor projects only.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 2.0V - 5.5V DC |
| Operating Current | 3mA (Typical) |
| Output Mode | TOG (Toggle) or Q (Momentary) |
| Sensitivity Adjustment | Adjustable via Capacitor Pad |
| Response Time | Approx. 60ms |
| PCB Dimensions | 16mm x 16mm |
| Interface Type | 3-Pin Header (VCC, GND, OUT) |
| Chip Model | TTP223-BA6 |
| Operating Temperature | -20°C to +70°C |
| Package Content | 1 x Touch Sensor Module |
Anonymous
Apr 13, 2026
Rating: 3/5
Okay for the price
Works but sensitivity varies with humidity. Good for indoor projects only.
Anonymous
Mar 19, 2026
Rating: 5/5
Perfect for DIY
Works flawlessly with my Arduino Uno. Very easy to wire up and the sensitivity is good out of the box.
Anonymous
Feb 13, 2026
Rating: 5/5
Great replacement
Used this to replace a mechanical button on a custom control panel. Looks much cleaner.
Anonymous
Feb 01, 2026
Rating: 5/5
Fast and reliable
Quick response time, exactly as described. Shipping was fast too.
Anonymous
Jan 27, 2026
Rating: 4/5
Sensitive but good
Very sensitive to touch, needed some tuning with the capacitor pad but works well once calibrated.
Q: What is the maximum load current?
A: This is a signal module. Use a transistor or relay module to drive high current loads.
Q: How do I change the output mode?
A: There are solder pads on the back labeled TOG and Q. Short the appropriate pad.
Q: Is there a protective film on the pad?
A: Yes, please remove the blue protective film before use for best sensitivity.
Q: Does this work with 3.3V logic?
A: Yes, it supports 2.0V to 5.5V so it is compatible with 3.3V systems.
Q: Can I connect this to Raspberry Pi?
A: Yes, compatible with GPIO pins. Ensure common ground is connected.