Anonymous
Apr 15, 2026
Rating: 3/5
Needs calibration
Output was off initially. Had to calibrate the zero position carefully. Works okay now.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Type | UART Serial (TTL) |
| Operating Voltage | 3.3V - 5V DC |
| Axis Configuration | 6-Axis (3-Axis Accelerometer + 3-Axis Gyroscope) |
| Communication Protocol | Asynchronous Serial |
| Module Dimensions | 23mm x 17mm x 3mm |
| Net Weight | 3.5 grams |
| Core Sensor Chip | InvenSense MPU6050 |
| Output Data Types | Acceleration, Gyroscope, Angle, Temperature |
| Operating Temperature | -40°C to +85°C |
| Mounting Hole Size | 3mm Diameter |
Anonymous
Apr 15, 2026
Rating: 3/5
Needs calibration
Output was off initially. Had to calibrate the zero position carefully. Works okay now.
Anonymous
Apr 03, 2026
Rating: 5/5
Stable readings
Kalman filter implementation on board is smooth. No drift issues so far in my quadcopter project.
Anonymous
Mar 30, 2026
Rating: 5/5
Perfect for balance robots
The serial output saves so much processing power on my Arduino. Angles are stable and easy to parse.
Anonymous
Mar 08, 2026
Rating: 4/5
Good module, tricky wiring
Works well once connected. Make sure to cross TX and RX pins. Documentation was a bit sparse.
Anonymous
Feb 10, 2026
Rating: 5/5
Excellent value
Much easier than raw I2C MPU6050. Plug and play with serial monitor. Highly recommended.
Q: Can I get raw data or just angles?
A: You can configure it to output raw accelerometer and gyroscope data as well.
Q: Is this compatible with 5V Arduino Uno?
A: Yes, the module supports 3.3V to 5V input logic.
Q: How do I change the output frequency?
A: You need to send specific configuration commands via serial to change the rate.
Q: Does it come with mounting screws?
A: No, screws are not included in the package.
Q: What is the default baud rate?
A: The default baud rate is 9600bps.