Anonymous
Mar 30, 2026
Rating: 5/5
Precise control
Humidity control is spot on. I compared it with a standalone hygrometer and the readings were almost identical. Very satisfied with the precision.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Display Type | LED Digital Display |
| Temperature Range | -50°C to 110°C |
| Humidity Range | 0% to 99% RH |
| Control Accuracy | ±0.5°C / ±3% RH |
| Input Voltage | DC 12V |
| Relay Load | 5A per Channel |
| Sensor Probe | Waterproof IP68 |
| Board Dimensions | 60mm x 40mm x 25mm |
| Operating Temp | -10°C to 60°C |
| Certification | CE RoHS Compliant |
Anonymous
Mar 30, 2026
Rating: 5/5
Precise control
Humidity control is spot on. I compared it with a standalone hygrometer and the readings were almost identical. Very satisfied with the precision.
Anonymous
Mar 18, 2026
Rating: 5/5
Perfect for incubator
Holds temperature perfectly for my egg incubator. The alarm feature is also helpful if the temperature goes out of the set range.
Anonymous
Mar 08, 2026
Rating: 5/5
Excellent stability
Used this for a wine cellar project and it maintains the environment perfectly. The dual output is very convenient for controlling both cooling and humidity.
Anonymous
Feb 26, 2026
Rating: 3/5
Okay product
Functions as expected but the instructions were confusing regarding the wiring diagram. Had to look up a video tutorial to get it working correctly.
Anonymous
Feb 20, 2026
Rating: 4/5
Good value
Works well for the price. The display is very bright which is good for visibility but might be too bright for a bedroom setup without covering it.
Q: Does it save settings after power loss?
A: Yes, the module has non-volatile memory that retains all your configured settings even after power is disconnected.
Q: Is there a delay setting?
A: Yes, there is a configurable compressor delay setting to protect your equipment from short cycling.
Q: How long is the sensor cable?
A: The standard waterproof sensor probe comes with approximately 1 meter of cable. It can be extended if necessary using standard wire.
Q: Can this control a 220V fan?
A: Yes, the relay acts as a switch. You can wire the 220V fan through the relay contacts, but the module itself must be powered by DC 12V.
Q: Can I use it for heating only?
A: Yes, the control mode is configurable. You can set it to heating only, cooling only, or both depending on your project needs.