Anonymous
Mar 20, 2026
Rating: 4/5
Good quality, tight fit
Material feels solid and well-machined. Had to ream slightly for exact fit but works well once installed. Shipping was fast.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Material Composition | High Strength Brass with Graphite Plugs |
| Lubrication Type | Self-Lubricating (Oil-Impregnated) |
| Inner Diameter Options | 32mm, 35mm, 38mm |
| Outer Diameter | Customizable to Specification |
| Length Specification | Customizable to Specification |
| Max Load Capacity | 60 N/mm² Dynamic |
| Max Sliding Speed | 0.5 m/s |
| Operating Temperature | -40°C to +200°C |
| Hardness | HB 90-120 |
| Surface Finish | Ra 0.8 μm |
Anonymous
Mar 20, 2026
Rating: 4/5
Good quality, tight fit
Material feels solid and well-machined. Had to ream slightly for exact fit but works well once installed. Shipping was fast.
Anonymous
Mar 13, 2026
Rating: 5/5
Perfect for heavy machinery
Used this for a conveyor belt repair. Runs smooth without extra oil. The graphite plugs really make a difference in maintenance intervals.
Anonymous
Feb 27, 2026
Rating: 5/5
Great replacement part
Matched the old worn-out bushing perfectly. Saved me from replacing the whole shaft. Easy to install with standard tools.
Anonymous
Feb 15, 2026
Rating: 3/5
Check dimensions carefully
Product is good quality but make sure you specify the exact ID needed when ordering. I ordered the 35mm and needed 34.5mm.
Anonymous
Feb 02, 2026
Rating: 5/5
Excellent durability
Been running for 3 months non-stop in a dusty environment. No wear visible yet. Highly recommend for industrial applications.
Q: Can this bearing be used in underwater applications?
A: Yes, the graphite bronze material performs well in wet environments and resists corrosion.
Q: Is this suitable for high rotational speeds?
A: It is recommended for low to moderate sliding speeds up to 0.5 m/s. Not ideal for high RPM rotation.
Q: Can you cut this to a specific length?
A: Yes, please specify the required length in the custom options field at checkout.
Q: What is the lead time for custom outer diameters?
A: Typically 7-10 business days for custom machining depending on order volume.
Q: Do I need to add grease during installation?
A: No, it is self-lubricating. However, a light coat of oil during initial installation can help seating.