Attributes

Brand	-
Category	Industrial Small Parts / Bearings & Bushings
Origin	-
Material	iglidur JSM Engineering Plastic
Inner Diameter	12 mm
Outer Diameter	14 mm
Length	10 mm
Static Load Capacity	250 N/mm²
Dynamic Load Capacity	100 N/mm²
Max Surface Speed	1.5 m/s
Operating Temperature	-50°C to +90°C
Lubrication	Self-Lubricating (Oil-Free)
Compliance	RoHS and REACH Compliant

5 reviews

Anonymous

Apr 19, 2026

Rating: 5/5

Durable

Running 24/7 for three months with no signs of wear. Excellent for high cycle applications.

Anonymous

Apr 06, 2026

Rating: 5/5

Cost Effective

Cheaper than metal equivalents and lasts longer in our application. Will buy again.

Anonymous

Apr 04, 2026

Rating: 5/5

Zero Maintenance

Installed these on our conveyor system. No grease needed since installation. Very happy with the performance.

Anonymous

Mar 21, 2026

Rating: 5/5

Smooth Motion

Very low friction compared to our old bronze bushings. The machine runs much quieter now.

Anonymous

Feb 17, 2026

Rating: 4/5

Good Fit

Dimensions were accurate. Required standard press fit tools but went in smoothly.

5 FAQ

Q: How do I remove old bushings safely?

A: Use a standard puller tool; do not hammer out directly to avoid housing damage.

Q: What shaft hardness is required for best performance?

A: Standard steel shafts are sufficient, no hardening is needed for this material.

Q: Is this suitable for food industry applications?

A: Some variants are FDA compliant, please check the specific part number documentation.

Q: Do I need to ream the bushing after installation?

A: We recommend checking clearance, but they are usually press-fit ready without reaming.

Q: Can this bushing be used underwater?

A: Yes, the material is highly resistant to moisture and corrosion.

Explore your interests

WWI Anrui Motor Deep Groove Ball Bearings 6200, 6201, 6202, 6203, 6204-ZZ 2RZ High-Speed Quiet

$40.00

Domestic Bearing Steel Linear Guide Rail Block MGN12H 9H 7H 15H MGW7C 9C 12C 15CS

$4.50

Automotive Inspection Fixture Standard Parts Round Liner Shaft Bushing Straight Sleeve Threaded Sleeve Guide Bushing Inspection Pin Sleeve In Stock

$3.00

304 Stainless Steel Cross Recessed Indented External Hex Bolts GB29.2 External Hex Screws M3 M4 M5 M6

$1.00

304 Stainless Steel Hex Socket Screw Cup Head Bolt Cylinder Head Extended M2 M2.5 M3 M4 M5 M6 M8 M10mm

$1.43

Real Photo EZO Imported Stainless Steel Bearing 608HZZ 8*22*7mm S608ZZ High Speed

$13.50

SWC Light/Heavy Duty Cross Shaft Universal Coupling, Universal Shaft, Drive Shaft, and Universal Joint

$220.00

T-Shaped Rubber Hexagonal Spider Coupling Elastic Block Polyurethane Buffer Pad Water Pump Shock Absorber Toughened Hex Pad

$5.00

Stainless Steel Bushings (Inner Dia: 2/2.5mm, Outer Dia: 4/5/6mm), Steel Guide Sleeves, Wear-Resistant Liners, Miniature Spacers

$2.00

Thickened Flange Nut with Washer, High-Strength Alloy Steel Press Plate Screw Nut M8-M36

$3.40

[M2-M20] Stainless Steel Spring Washer

$0.76

$Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J$

Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J

$15.00

Sunroom Column Base Steel Casting Embedded Parts 80 100 120 150 Special Square Tube Base Connector

$6.03

Nickel-Plated/Black PB Pan Head Flat Point Self-Tapping Screw, Cross Recessed Small Screw M1-M4

$1.00

Box-Type Shaft Slider Linear Bearing SCS8 10 12 13 16 20 25 30 35 40 50 60UU

$6.40

Maintenance-Free Plastic Linear Bearing Slide Bushing LM1016230450UU (igus Alternative)

$6.36

Non-Standard BFH Aluminum Alloy Bearing Housing with Retaining Ring, Round Flange, Single Bearing Fixed Mount BARA BFF23

$16.90

Daiwa Baitcasting Reel Parts, Coaster, Large/Small Black/Red Spider, Sea Spider, Elite One-Way Bearing Bushing

$20.00

Imported Bearing Model Assortment: 6000RS, 6001 High-Speed, 6002 Motor, 6003, 6004, 6005, 6006

$2.50

25mm Round Stainless Steel Pipe Connector, Clothes Drying Rack Accessory, Display Stand Fastener, Shelf Fixing Two-Way Joint

$1.20

Miniature Ball Bearings with Shoulder Flange Catalog - Inner Diameters 2 3 4 5 6 7 8 9 10

$13.00

L-Type Jaw Coupling, Spider Coupling, High Torque, Black Oxide Finish, Free Shipping from Manufacturer

$7.00

Japan EKI LM3 4 5 6 8 10 12 16 20 25 30 35 40 50UU Imported Linear Bearing

$10.50

Japanese Precision Imported NSK Linear Bearing LM 3 4 5 6 8 10 12 13 16 20 25 30 UU

$6.50

304 Stainless Steel Countersunk Hex Socket Screw and Nut Set with Flat and Spring Washers

$1.29

Grade 12.9 External Hex Screws and Nuts Complete Set High-Strength Bolts with Flat and Spring Washers M6-M24

$9.03

304 Stainless Steel Nuts, Caps, Flat Washers, and Spring Washers - Sizes M3, M4, M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30

$1.00

C&U Bearings for Automotive Alternators - SA608, 6201, 6202, 6302, 6303, 6304/2RSM/C3

$3.50

Plastic Hammer Head Nut M8 M10 Furniture Connector Embedded Fastener Hardware Accessories

$5.11

Swing Cylinder Front Bucket Bushing 95*110*80 with TOM Oil Bronze Bushing for Excavator and Large Loader Liners

$90.00

304 Stainless Steel Rivet Nuts, Aluminum Flat Head Rivnuts, Countersunk Rivet Nuts Assortment M3 M4 M5 M6 M8 M10

$0.91

Stainless Steel Angle Bracket 90-Degree L-Shaped Fixator Corner Iron Right-Angle Triangle Support Shelf Bracket Hardware Connector Plate T

$2.66

Aluminum Alloy Socket Head Cap Screw, Cup Head Fastener M4-M10mm

$7.00

Galvanized High-Strength Imperial Hex Flange Nuts UNC Grade 8, Anti-Slip Locking; UNF Fine Thread Nuts

$2.20

M3-M20 PVC External Hex Head Screws, Gray Insulated Bolts, Acid and Alkali Resistant Plastic Fasteners

$2.64

NSK High-Speed Imported Micro Bearings 605 606 607 608 609 ZZ Z1 Z2 Z3 Z4

$3.00

High-Precision Hardened Steel Bushing/Guide Sleeve: ID 18/19/20mm, Custom Non-Standard Bearing Steel Inner Rings Assortment

$1.77

Phone Gimbal Shim, Screw Plate, Heavy-Duty Clamp Shim, Internal 1/4" Screw Pad, Nut Washer, Anti-Slip Fixation Pad

$2.80

304 Stainless Steel Extended Cylindrical Sleeve Shaft Bushing Non-Threaded Spacer Hollow Liner M2 M3 M4 M5

$1.66

Guwanji Zinc-Plated Iron Cross Countersunk Screw, Nut, Flat Head Bolt, and Spring Washer Assortment M2-M12

$1.82