Anonymous
Mar 20, 2026
Rating: 5/5
No maintenance needed
The graphite plugs really work. I installed these in a dusty environment and haven't had to add any oil yet.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Bore Diameter | 8 mm |
| Outer Diameter | 15 mm |
| Overall Length | 60 mm |
| Flange Diameter | 25 mm |
| Inner Sleeve Material | Bronze with Graphite Plugs |
| Outer Shell Material | Carbon Steel |
| Lubrication Type | Self-Lubricating (Solid) |
| Dynamic Load Capacity | 1200 N |
| Max Operating Temperature | 120°C |
| Surface Finish | Zinc Plated |
Anonymous
Mar 20, 2026
Rating: 5/5
No maintenance needed
The graphite plugs really work. I installed these in a dusty environment and haven't had to add any oil yet.
Anonymous
Mar 19, 2026
Rating: 5/5
Reliable bulk purchase
Ordered 20 units for production. Consistency across all parts was high and dimensions matched the spec sheet perfectly.
Anonymous
Mar 11, 2026
Rating: 4/5
Good value
Slightly tighter fit than expected but seated well after gentle tapping. Quality seems solid for the price point.
Anonymous
Feb 23, 2026
Rating: 5/5
Great for automation project
Works smoothly on my linear rails. The flange made mounting very easy and the self-lubricating feature saves time on maintenance.
Anonymous
Jan 30, 2026
Rating: 4/5
Solid build
Heavy duty steel outer shell provides good protection for the bronze sleeve. Happy with the durability so far.
Q: Is this compatible with standard LM8 shafts?
A: Yes, the 8mm bore is designed specifically for use with standard LM8 linear shafts.
Q: Is the zinc plating sufficient for outdoor use?
A: The zinc plating offers basic corrosion resistance, but for harsh outdoor environments, additional protection is advised.
Q: What are the flange mounting hole dimensions?
A: The flange has 4 mounting holes with a diameter of 4.5mm and a PCD of 20mm.
Q: Do I need to add grease during installation?
A: No, the graphite plugs provide solid lubrication throughout the lifecycle. Additional grease is not required.
Q: What shaft tolerance is recommended for this bearing?
A: We recommend an h6 or g6 shaft tolerance for optimal performance and fit.