Anonymous
Mar 21, 2026
Rating: 5/5
Excellent for hard stones
Not just for jade; I used this on some agate and it performed beautifully. The PU material holds up well under pressure.
Description
Reviews
| Brand | - |
| Category | 3C Digital Accessories / USB Multi-Function Power Bank |
| Origin | - |
| Material | High-Density Polyurethane (PU) |
| Shape | Conical Polishing Wheel |
| Compatible Machinery | Universal Jade Bangle Processing Machines |
| Grit Level | Fine Polish (3000+ equivalent) |
| Shank Diameter | 6mm Standard Fit |
| Wheel Diameter | 25mm |
| Application | Final Polishing of Jade, Agate, and Hardstones |
| Durability | Long-lasting wear resistance |
| Package Contents | 1 x PU Conical Polishing Wheel |
| Origin | Manufactured for Industrial Lapidary Use |
Anonymous
Mar 21, 2026
Rating: 5/5
Excellent for hard stones
Not just for jade; I used this on some agate and it performed beautifully. The PU material holds up well under pressure.
Anonymous
Mar 19, 2026
Rating: 4/5
Good value consumable
Works well for the final polishing stage. Lasts longer than felt wheels but not quite as long as some premium brands. Still a great buy.
Anonymous
Mar 18, 2026
Rating: 5/5
Smooth operation
Very smooth operation on my lathe. The conical shape makes it easy to get into the inner curves of the bangles.
Anonymous
Mar 16, 2026
Rating: 4/5
Solid performance
Does exactly what it says. Removes minor scratches from the previous grit and leaves a high gloss. Would purchase again.
Anonymous
Mar 09, 2026
Rating: 5/5
Easy to use
I was worried about damaging my pieces, but this glue-bonded wheel is very forgiving. Highly recommended for beginners.
Anonymous
Mar 09, 2026
Rating: 5/5
Perfect finish for jade bangles
This PU wheel gives an incredible mirror shine to my jade bangles without generating too much heat. It fits my universal machine perfectly.
Q: What speed should I run this wheel at?
A: For best results, we recommend running the machine between 1200 and 1800 RPM. Always start at a lower speed to test.
Q: Will this fit a Dremel tool?
A: If your Dremel accepts a 6mm shank or you have a 6mm collet, yes. Most standard lapidary machines use this size directly.
Q: How do I clean the wheel if it gets clogged?
A: Use a dedicated abrasive cleaning stick or a stiff brass brush gently while the machine is off to remove residue.
Q: Is this suitable for soft stones like turquoise?
A: While primarily designed for hard stones like jade, it can be used on turquoise with very light pressure to avoid grooving.
Q: Do I need to use water or oil with this wheel?
A: This PU wheel is designed for dry polishing. However, if you notice excessive heat, brief intermittent dipping in water is acceptable.