Anonymous
Mar 28, 2026
Rating: 5/5
Reliable components
As someone who prints engineering prototypes, reliability is key. The thermistor readings are accurate and the heating tube warms up quickly. Highly recommended for serious users.
Description
Reviews
| Brand | - |
| Category | 3C Digital Accessories / USB Multi-Function Power Bank |
| Origin | - |
| Compatibility | Artillery Sidewinder X1, Sidewinder X2, Genius |
| Material | High-Temperature Resistant Silicone |
| Color | Red |
| Package Contents | 1x Silicone Sleeve, 1x Thermistor, 1x Heating Tube, 1x Heat Break |
| Thermistor Resistance | 100k Ohm at 25°C |
| Heating Power | 40W |
| Voltage Rating | 24V |
| Nozzle Thread | M6 Standard |
| Max Temperature | 300°C Continuous Operation |
| Installation Difficulty | Moderate (Basic Tools Required) |
Anonymous
Mar 28, 2026
Rating: 5/5
Reliable components
As someone who prints engineering prototypes, reliability is key. The thermistor readings are accurate and the heating tube warms up quickly. Highly recommended for serious users.
Anonymous
Mar 23, 2026
Rating: 5/5
Perfect replacement kit for my Sidewinder
My original heating element failed after a year of heavy use. This kit had everything I needed to get back up and running. The silicone sleeve fits snugly and the temperature stability is excellent.
Anonymous
Mar 09, 2026
Rating: 5/5
Solved my clogging issues
I was experiencing frequent heat breaks and clogs. Replacing the entire hotend assembly with this kit completely solved the problem. Prints are coming out smooth again.
Anonymous
Mar 09, 2026
Rating: 4/5
Good quality, instructions could be better
The parts themselves are high quality and match the OEM specifications perfectly. Installation took a bit longer than expected because the included diagram was small, but overall a great value.
Anonymous
Mar 07, 2026
Rating: 5/5
Great value bundle
Buying these parts individually would cost much more. Having the sleeve, thermistor, and heater all in one package saved me time and money. Fast shipping too!
Anonymous
Mar 02, 2026
Rating: 3/5
Works well but tricky install for beginners
The product works great now that it is installed, but if you have never taken apart a hotend before, be prepared to watch several YouTube tutorials. Not a plug-and-play solution for total novices.
Q: Can I use this with PLA and ABS filaments?
A: Absolutely. This heating kit supports temperatures well beyond what is required for both PLA and ABS, handling up to 300°C safely.
Q: What tools do I need for installation?
A: You will typically need a hex key set, wire cutters/strippers, and possibly a soldering iron depending on your printer's wiring configuration.
Q: Does the thermistor come pre-calibrated?
A: The thermistor follows standard 100k resistance curves used by most firmware (Marlin/Klipper), so no special calibration file is needed, though PID tuning is recommended after installation.
Q: How long is the warranty on this kit?
A: This product comes with a standard 90-day manufacturer warranty covering defects in materials and workmanship.
Q: Is this compatible with the original Artillery Sidewinder X1?
A: Yes, this kit is fully compatible with the original Sidewinder X1 as well as the X2 and Genius models.