Anonymous
Mar 27, 2026
Rating: 5/5
Solved my under-extrusion issues
I was struggling with inconsistent extrusion for weeks. Swapping to this full assembly fixed the problem instantly. The thermal paste pre-applied was a nice touch.
Description
Reviews
| Brand | - |
| Category | 3C Digital Accessories / USB Multi-Function Power Bank |
| Origin | - |
| Compatible Model | Creality CR-6 SE |
| Nozzle Diameter | 0.4mm (Standard) |
| Filament Size | 1.75mm |
| Material | Aluminum Alloy & Brass |
| Heater Power | 24V 40W |
| Thermistor Type | NTC 100K |
| Assembly Type | Full Hotend Assembly |
| Cooling Fan | Included (5015 Blower) |
| Connector Type | XH2.54 2-Pin |
| Package Contents | 1x Hotend Assembly, 1x Nozzle, 1x Thermal Paste |
Anonymous
Mar 27, 2026
Rating: 5/5
Solved my under-extrusion issues
I was struggling with inconsistent extrusion for weeks. Swapping to this full assembly fixed the problem instantly. The thermal paste pre-applied was a nice touch.
Anonymous
Mar 21, 2026
Rating: 3/5
Works well but fan is slightly noisy
The heating element works great, but the cooling fan is a bit louder than the stock one. It doesn't affect print quality, just something to note if you print in a quiet room.
Anonymous
Mar 17, 2026
Rating: 5/5
Perfect replacement for my CR-6 SE
My original hotend started clogging frequently, so I ordered this upgrade. Installation was straightforward and took about 15 minutes. The print quality improved immediately with better layer adhesion.
Anonymous
Mar 16, 2026
Rating: 4/5
Good quality but instructions could be better
The part itself feels very solid and heats up quickly. However, the included manual was a bit vague on wire routing. If you have some experience with 3D printers, this is a non-issue.
Anonymous
Mar 09, 2026
Rating: 5/5
Fast shipping and great performance
Arrived two days earlier than expected. The nozzle alignment was perfect out of the box. I've printed over 500g of PLA without a single jam.
Anonymous
Mar 02, 2026
Rating: 5/5
Excellent upgrade component
Very happy with this purchase. The build quality is superior to the original part that came with my printer. Highly recommend for anyone needing a reliable replacement.
Q: Do I need to level the bed again after installation?
A: Yes, whenever you replace the hotend or nozzle, it is highly recommended to re-level your print bed to ensure the first layer adheres correctly.
Q: What is the maximum temperature this hotend can reach?
A: The heater cartridge is rated for up to 260°C, which is suitable for PLA, PETG, ABS, and TPU filaments.
Q: Does this come with a silicone sock?
A: This package includes the hotend assembly, nozzle, and thermal paste. The silicone sock is sold separately, though your existing one may fit if it is still in good condition.
Q: Is this compatible with the CR-6 Max model?
A: No, this assembly is specifically designed for the Creality CR-6 SE. The mounting points and wiring harness differ for the Max model.
Q: Is the thermistor replaceable if it fails?
A: The thermistor is integrated into the assembly. While technically skilled users can replace just the sensor, we recommend replacing the entire unit for safety and reliability if a failure occurs.