Anonymous
Mar 26, 2026
Rating: 4/5
Does the job well
Installed in a pharmaceutical storage room. It meets our compliance requirements for monitoring. The display is bright and readable from a distance. Setup was straightforward following the manual.
Description
Reviews
| Brand | - |
| Category | Machinery & Equipment / Thermo-hygrometers |
| Origin | - |
| Output Signal | 4-20mA / RS485 Modbus |
| Display Type | LCD Digital Display |
| Temperature Range | -40°C to +80°C |
| Humidity Range | 0% to 100% RH |
| Accuracy (Temp) | ±0.5°C at 25°C |
| Accuracy (Humidity) | ±3% RH at 25°C |
| Power Supply | 24V DC (12-36V DC compatible) |
| Protection Rating | IP65 Dust and Water Resistant |
| Mounting Style | Wall-Mounted with Screw Holes |
| Material | ABS Plastic Housing |
Anonymous
Mar 26, 2026
Rating: 4/5
Does the job well
Installed in a pharmaceutical storage room. It meets our compliance requirements for monitoring. The display is bright and readable from a distance. Setup was straightforward following the manual.
Anonymous
Mar 26, 2026
Rating: 5/5
Reliable and accurate
Been using this sensor in a greenhouse environment for three months now. It handles the high humidity without any condensation issues inside the housing. The response time is quick when conditions change.
Anonymous
Mar 24, 2026
Rating: 4/5
Solid industrial unit
Good build quality and the RS485 communication works well for logging data. The only reason for 4 stars is that the menu navigation takes a little getting used to, but once configured, it runs flawlessly.
Anonymous
Mar 21, 2026
Rating: 5/5
Great value for money
Compared to other industrial transmitters we looked at, this LEFOO model offers excellent features at a competitive price. The dual output option (analog and digital) gives us great flexibility for redundancy.
Anonymous
Mar 12, 2026
Rating: 5/5
Robust construction
The IP65 rating is no joke; we have one installed near a wash-down area and it has held up perfectly against moisture and dust. Highly recommend for harsh industrial environments.
Anonymous
Mar 02, 2026
Rating: 5/5
Perfect for our warehouse monitoring
We installed six of these units in our cold storage facility. The 4-20mA output integrates seamlessly with our existing PLC system, and the digital display makes local checks very easy. Accuracy seems spot on compared to our calibrated handheld meters.
Q: Does it support 2-wire or 3-wire 4-20mA connection?
A: The LEFOO transmitter supports a 2-wire loop-powered 4-20mA configuration. Please ensure your power supply voltage is sufficient to drive the loop load resistance.
Q: What is the length of the cable included with the sensor?
A: This wall-mounted transmitter does not include an external probe cable as the sensor element is internal to the housing. You will need to wire your power and signal cables to the terminal blocks inside the unit.
Q: Can I mount this outdoors in direct sunlight?
A: While the unit is IP65 rated for water and dust, we recommend installing it in a shaded area or using a sun shield if placed outdoors. Direct prolonged sunlight can affect the temperature reading accuracy due to solar heating of the housing.
Q: Can this device connect directly to a standard Arduino or Raspberry Pi?
A: Yes, you can connect via the RS485 interface using a MAX485 module for Raspberry Pi or Arduino. Please ensure you use the Modbus RTU protocol library to read the data registers.
Q: Is calibration possible if the readings drift over time?
A: Yes, the device features user-adjustable calibration offsets for both temperature and humidity through the button interface on the front panel. Refer to page 12 of the user manual for the step-by-step procedure.