Anonymous
Mar 28, 2026
Rating: 5/5
Reliable and consistent
We bought a bulk pack for our university lab. All units tested working perfectly. The detection range is stable and the response time is quick enough for high-speed line tracking.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Sensors |
| Origin | - |
| Brand | Youxin Electronics |
| Model Number | TCRT5000 |
| Sensor Type | Infrared Reflection |
| Operating Voltage | 3.3V - 5V DC |
| Output Signal | Digital Switching (0 and 1) |
| Detection Distance | 1mm - 25mm (Adjustable) |
| Comparator Chip | LM393 |
| PCB Dimensions | 32mm x 14mm x 5mm |
| Mounting Hole Diameter | 3mm |
| Application | Line Tracking, Obstacle Avoidance, Counting |
Anonymous
Mar 28, 2026
Rating: 5/5
Reliable and consistent
We bought a bulk pack for our university lab. All units tested working perfectly. The detection range is stable and the response time is quick enough for high-speed line tracking.
Anonymous
Mar 27, 2026
Rating: 5/5
Perfect for my line follower robot
These sensors work flawlessly with my Arduino Uno project. The sensitivity adjustment potentiometer makes it very easy to calibrate for different surface colors. Great value for the price.
Anonymous
Mar 16, 2026
Rating: 5/5
Easy to use for beginners
I was worried about wiring this up, but the pins are clearly labeled (VCC, GND, OUT). The included documentation helped me get it running in under 10 minutes. Highly recommended.
Anonymous
Mar 14, 2026
Rating: 4/5
Works as described
Does exactly what it says on the tin. The IR LED and receiver are well-positioned. Just make sure your power supply is stable, or the readings might fluctuate slightly.
Anonymous
Mar 14, 2026
Rating: 5/5
Excellent sensitivity control
The blue potentiometer allows for fine-tuning the threshold. I used these for an obstacle avoidance car, and they react instantly to objects within the 2cm range. Very satisfied.
Anonymous
Mar 13, 2026
Rating: 4/5
Good quality, fast shipping
The module arrived well-packaged. It detects lines accurately, though you need to ensure ambient light doesn't interfere too much. Overall a solid component for hobbyist projects.
Q: What is the maximum current consumption of this module?
A: The module typically consumes around 20mA when the IR LED is active. Please refer to the datasheet for specific graphs regarding duty cycle and power saving modes.
Q: Does the package include mounting screws?
A: No, the package contains only the sensor modules. Standard M3 screws and standoffs are required for mounting, which are commonly available at any hardware store.
Q: Is this compatible with Raspberry Pi GPIO pins?
A: Yes, it is compatible. Since the output is digital, you can connect the OUT pin to a GPIO input pin. Just ensure you are using the 3.3V or 5V rail appropriately based on your Pi model.
Q: Can I detect black lines on a white surface?
A: Absolutely. This TCRT5000 module is specifically designed for that purpose. The infrared light reflects differently off white and black surfaces, allowing the comparator to switch the output state.
Q: Can this sensor work outdoors in sunlight?
A: While the sensor can function outdoors, direct strong sunlight may interfere with the infrared signal. We recommend shielding the sensor or using it in shaded areas for best results.