Anonymous
Mar 24, 2026
Rating: 4/5
Good value for the price
Solid performance within the specified 0-40kPa range. Calibration was straightforward. Just ensure your tubing fits the ports tightly to avoid leaks.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Sensors |
| Origin | - |
| Model Number | XGZP6847A |
| Pressure Range | 0-40 kPa |
| Output Signal | Analog Voltage |
| Supply Voltage | 3.3V - 5V DC |
| Accuracy | ±1.5% FS |
| Operating Temperature | -20°C to +85°C |
| Media Type | Air and Non-corrosive Liquids |
| Port Size | Barb Fitment Compatible |
| Package Type | DIP Module with PCB |
| Application | Water Level, HVAC, Air Flow |
Anonymous
Mar 24, 2026
Rating: 4/5
Good value for the price
Solid performance within the specified 0-40kPa range. Calibration was straightforward. Just ensure your tubing fits the ports tightly to avoid leaks.
Anonymous
Mar 22, 2026
Rating: 5/5
Great for prototyping
Exactly what I needed for my senior design project. The documentation provided by the seller helped me get the wiring right on the first try.
Anonymous
Mar 21, 2026
Rating: 5/5
Perfect for my aquarium project
This sensor works flawlessly for monitoring water levels in my custom aquarium setup. The analog output is stable and easy to read with an Arduino.
Anonymous
Mar 10, 2026
Rating: 4/5
Works as described
The sensor is accurate enough for general robotics applications. Note that it is designed for low pressure, so do not exceed the 40kPa limit.
Anonymous
Mar 09, 2026
Rating: 5/5
Excellent sensitivity
Very sensitive to small changes in air pressure. I am using it to detect airflow in a ventilation duct and it performs better than expected.
Anonymous
Mar 02, 2026
Rating: 5/5
Reliable and compact
I used this for a pneumatic control system. It responds quickly to pressure changes and the module form factor makes it easy to mount.
Q: Can this sensor be used directly with saltwater?
A: While the sensor can measure liquid levels, the internal components are not coated for corrosive media like saltwater. We recommend using it with fresh water or isolating the media with an air gap tube.
Q: What is the pinout configuration for this module?
A: The module typically has three pins: VCC (Power), GND (Ground), and OUT (Signal). Please refer to the datasheet included in the package for the specific board layout diagram.
Q: Can I use this to measure tire pressure?
A: No, this sensor is rated for 0-40 kPa (approx. 0-5.8 PSI). Standard car tire pressure is much higher (around 30-35 PSI or 200+ kPa) and would likely damage this sensor.
Q: Is the output ratiometric to the supply voltage?
A: Yes, the analog output is generally ratiometric. This means if you change the supply voltage, the zero point and span will scale proportionally. A stable power supply is recommended for consistent readings.
Q: Does this come with calibration data?
A: Each sensor is factory calibrated, but specific calibration coefficients are not individually printed on the unit. The module is designed to work linearly within the rated range without complex user calibration.