Anonymous
Mar 24, 2026
Rating: 4/5
Good accuracy, simple interface
The analog interface makes integration very simple without needing complex libraries. Accuracy is within spec for general environmental monitoring.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Sensors |
| Origin | - |
| Model Number | AM1011A |
| Output Type | Analog Voltage |
| Operating Voltage | 2.7V to 5.5V DC |
| Temperature Range | -40°C to +85°C |
| Humidity Range | 0% to 100% RH |
| Accuracy (Temperature) | ±0.5°C typical |
| Accuracy (Humidity) | ±3% RH typical |
| Response Time | < 10 seconds |
| Power Consumption | Low Power (< 1mA during measurement) |
| Package Type | Module with Pin Header |
Anonymous
Mar 24, 2026
Rating: 4/5
Good accuracy, simple interface
The analog interface makes integration very simple without needing complex libraries. Accuracy is within spec for general environmental monitoring.
Anonymous
Mar 20, 2026
Rating: 4/5
Reliable for indoor monitoring
Using this in a small greenhouse setup. It provides consistent readings compared to my calibrated reference meter. Just remember it needs a warm-up time.
Anonymous
Mar 15, 2026
Rating: 5/5
Excellent low power performance
Battery life on my remote weather station has improved significantly since switching to the AM1011A. Highly recommended for IoT applications.
Anonymous
Mar 13, 2026
Rating: 5/5
Compact and effective
Small form factor fits perfectly inside my custom enclosure. Readings match my smart thermostat closely. Very satisfied with this purchase.
Anonymous
Mar 10, 2026
Rating: 5/5
Perfect for Arduino projects
This sensor module works flawlessly with my Arduino Uno. The analog output is stable and easy to read. Great value for the precision offered.
Anonymous
Mar 03, 2026
Rating: 5/5
Great for learning sensors
Bought this for a university project. Documentation was sufficient to get it working quickly. The voltage output scales linearly as expected.
Q: How do I calibrate this sensor?
A: The sensor is factory calibrated. For most applications, no further calibration is needed. If high precision is required, compare against a reference meter and apply an offset in your code.
Q: Is there a digital version of this specific model?
A: The AM1011A is specifically an analog output model. If you require a digital interface (I2C/UART), please check our AM2302 or SHT series products.
Q: What is the sampling rate of the AM1011A?
A: The sensor typically completes a measurement cycle in under 2 seconds, but for best accuracy and power saving, we recommend sampling every 10-30 seconds.
Q: Does this module come with a connector cable?
A: No, the module comes with standard pin headers. You will need to solder wires or use jumper cables to connect it to your microcontroller.
Q: Can this be used outdoors directly?
A: The sensor element is sensitive to direct water exposure and dust. For outdoor use, please house it in a breathable, weatherproof enclosure.