A
Anonymous
Mar 26, 2026
Rating: 5/5
Will buy again
Helpful product page and smooth experience overall.
Description
3D Upgraded Extruder Nozzle V6E Kit Hotend for 3D Printing, 3D Printer Accessories V5 Machine Version Extruder Head
Reviews
Attributes
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Compatibility | V6 and V5 Hotend Systems |
| Material | Hardened Steel and Brass |
| Nozzle Diameter | 0.4mm (Interchangeable) |
| Max Temperature | 300°C |
| Heater Cartridge | 12V/24V 40W Ceramic |
| Thermistor Type | NTC 100K Beta 3950 |
| Cooling Fan | 4010 5V High Speed |
| Thread Size | M6 Standard |
| Package Contents | Hotend Assembly, Nozzles, Thermal Paste |
| Weight | 85 grams |
6 reviews
A
Anonymous
Mar 09, 2026
Rating: 4/5
Reliable and practical
After a few days of use, it feels dependable and consistent for routine tasks.
A
Anonymous
Mar 07, 2026
Rating: 4/5
Works as described
No major issues. The finish and fit are both acceptable for this range.
A
Anonymous
Mar 07, 2026
Rating: 5/5
Solid everyday option
Simple, reliable, and easy to integrate with my existing setup.
A
Anonymous
Mar 06, 2026
Rating: 4/5
Good quality for the price
I use it regularly and the performance has been stable so far.
A
Anonymous
Mar 06, 2026
Rating: 5/5
Exactly what I expected
The 3D Upgraded Extruder Nozzle V6E Kit Hotend for 3D Printing, 3D Printer Accessories V5 Machine Version Extruder Head arrived in good condition and matches the listing details.
5 FAQ
Q: Is this compatible with a 24V power supply?
A: Yes, this kit supports both 12V and 24V systems. Please ensure you select the correct voltage jumper setting on the board if applicable, though the heater cartridge is often dual voltage rated.
Q: What is the length of the thermistor wires?
A: The thermistor and heater cartridge wires are approximately 30cm long, which is sufficient for most Cartesian 3D printer builds without needing extensions.
Q: Can I use this with PETG filament?
A: Absolutely. This hotend is designed to handle all common filaments including PLA, PETG, ABS, and TPU, provided you adjust your temperature settings accordingly.
Q: Does it come with multiple nozzle sizes?
A: The standard kit includes one pre-installed 0.4mm nozzle. Additional nozzles of various sizes (0.2mm, 0.6mm, 0.8mm) are sold separately but are fully compatible with this heat block.
Q: Do I need to recalibrate my E-steps after installing?
A: Generally, no. Since this is a direct replacement for the hotend assembly and does not change the extruder gear mechanism, your E-steps should remain accurate. However, always run a test print to verify flow rate.
![[Lawyer's AI New Partner] DingTalk A1 Legal Edition AI Smart Voice Recorder Analysis Translation Card](https://www.gosteppe.com/cache/medium/product/210126/legacy-main-7b7dc5a93c8519defae1c408.png)
![[In Stock] MINISO YOYO Wind-Chasing Diary Series Aromatherapy Figure Blind Box – Youyou-chan Ornament](https://www.gosteppe.com/cache/small/product/269008/legacy-main-75745db0463ce5521fe5703d.webp)
![[Chip 3.0 Upgraded Model] Senzhou TDS Water Quality Tester for Tap and Drinking Water Health Monitoring](https://www.gosteppe.com/cache/small/product/268996/legacy-main-32173fe50b846ac0e87ae26e.webp)
![[Shenzhen Best Seller] Premium Wearable Negative Ion Air Purifier - Neck-Hanging Portable Electronic Mask](https://www.gosteppe.com/cache/small/product/268987/legacy-main-5f71c8070119587e6427efe9.webp)
