Anonymous
Mar 30, 2026
Rating: 4/5
Works as described
No major issues. The finish and fit are both acceptable for this range.
Description
Reviews
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Material | PETG (Polyethylene Terephthalate Glycol) |
| Finish | Metallic Sheen |
| Diameter | 1.75 mm |
| Weight | 1 kg (2.2 lbs) |
| Print Temperature | 230°C - 250°C |
| Bed Temperature | 70°C - 80°C |
| Tolerance | +/- 0.03 mm |
| Spool Material | Recyclable Plastic |
| Compatibility | Most FDM 3D Printers |
| Color Series | Metallic Silver |
Anonymous
Mar 30, 2026
Rating: 4/5
Works as described
No major issues. The finish and fit are both acceptable for this range.
Anonymous
Mar 29, 2026
Rating: 4/5
Reliable and practical
After a few days of use, it feels dependable and consistent for routine tasks.
Anonymous
Mar 26, 2026
Rating: 4/5
Good quality for the price
I use it regularly and the performance has been stable so far.
Anonymous
Mar 13, 2026
Rating: 5/5
Solid everyday option
Simple, reliable, and easy to integrate with my existing setup.
Anonymous
Mar 12, 2026
Rating: 5/5
Will buy again
Helpful product page and smooth experience overall.
Anonymous
Mar 04, 2026
Rating: 5/5
Exactly what I expected
The ALIZ PETG Metallic High-Speed 3D Printer Filament arrived in good condition and matches the listing details.
Q: Do I need to dry the filament before printing?
A: While our filament is shipped in moisture-sealed packaging, if it has been exposed to humidity for over 24 hours, drying it at 60°C for 4 hours is recommended for best results.
Q: Is this filament compatible with the Ender 3 V2?
A: Yes, the ALIZ PETG Metallic filament works perfectly with the Ender 3 V2, provided your hotend can reach temperatures up to 250°C.
Q: Is the spool reusable or recyclable?
A: The spool is made from recyclable plastic. We encourage customers to reuse it for storage or recycle it according to local plastic recycling guidelines.
Q: Does the metallic pigment cause nozzle wear?
A: Our metallic series uses fine pigments that are generally safe for brass nozzles. However, for extended printing, we recommend using a hardened steel nozzle to maximize longevity.
Q: What is the best bed adhesion method for this material?
A: We recommend using a PEI sheet or applying a thin layer of glue stick on a glass bed for optimal adhesion with this PETG variant.