Anonymous
Mar 25, 2026
Rating: 3/5
Works but requires careful installation
The nozzle works fine once installed, but I found the threads slightly tight. Make sure to heat the hotend before tightening to avoid stripping the threads.
Description
Reviews
| Brand | - |
| Category | Agricultural Machinery, Tools & Film / Irrigation Tools |
| Origin | - |
| Material | High-Purity Brass |
| Nozzle Type | MK8 Pointed |
| Thread Size | M6 Thread |
| Orifice Diameter | 0.4mm (Standard) |
| Surface Finish | Engraved Identification Markings |
| Compatibility | Ender 3, CR-10, Prusa i3 MK2/MK3 |
| Max Temperature | Up to 300°C |
| Package Quantity | 5 Pieces per Pack |
| Weight | 4 grams per nozzle |
| Application | FDM 3D Printing Extrusion |
Anonymous
Mar 25, 2026
Rating: 3/5
Works but requires careful installation
The nozzle works fine once installed, but I found the threads slightly tight. Make sure to heat the hotend before tightening to avoid stripping the threads.
Anonymous
Mar 13, 2026
Rating: 5/5
Stocking up for the lab
Bought several packs for our community makerspace. They are durable and handle high-temperature filaments well without deforming. Great bulk purchase.
Anonymous
Mar 11, 2026
Rating: 5/5
Consistent extrusion
I've used these for PLA and PETG with no issues. The pointed tip design seems to help with layer adhesion on detailed prints. Highly recommended for hobbyists.
Anonymous
Mar 07, 2026
Rating: 4/5
Good value for money
Solid construction and good thermal conductivity. I deducted one star because the packaging was a bit flimsy, but the nozzles themselves are excellent for the price.
Anonymous
Mar 06, 2026
Rating: 5/5
Reliable replacement parts
Exactly what I needed. The surface engraving is clear and doesn't wear off easily. Flow rate is consistent, and I haven't experienced any clogging so far.
Anonymous
Mar 05, 2026
Rating: 5/5
Perfect fit for my Ender 3
These brass nozzles fit perfectly on my MK8 extruder. The engraving makes it easy to identify the size quickly. Print quality improved immediately after swapping out my old clogged nozzle.
Q: Can I use these nozzles with abrasive filaments like Carbon Fiber?
A: We do not recommend using standard brass nozzles with abrasive filaments like Carbon Fiber or Glow-in-the-dark, as they will wear down the orifice quickly. Please consider our hardened steel nozzle option for those materials.
Q: How often should I replace the brass nozzle?
A: For regular hobbyist use, replacing the nozzle every 6 to 12 months is recommended, or sooner if you notice inconsistent extrusion or frequent clogs.
Q: Are these nozzles compatible with the Creality Ender 3 V2?
A: Yes, these MK8 pointed brass nozzles are fully compatible with the Ender 3 V2 as it uses the standard M6 thread MK8 hotend system.
Q: Does the pack include different sizes or just 0.4mm?
A: This specific listing is for the 0.4mm orifice size only. We do offer multi-packs with varied sizes in a separate product listing if you need variety.
Q: What is the maximum safe operating temperature for these nozzles?
A: These brass nozzles are rated for continuous use up to 300°C, making them suitable for PLA, PETG, ABS, and TPU filaments.