Anonymous
Apr 14, 2026
Rating: 4/5
Good Product, Messy Application
The shielding effectiveness is top notch, but copper foil can be a bit tricky to handle without tearing. Wear gloves to avoid fingerprints on the adhesive.
Description
Reviews
| Brand | - |
| Category | Musical Instrument Accessories / Guitar Electronic Accessories |
| Origin | - |
| Material | Pure Copper Foil |
| Width | 2 inches (50mm) |
| Length | 30 feet (9 meters) |
| Thickness | 0.05mm |
| Adhesive Type | Conductive Acrylic |
| Conductivity | High EMI/RFI Shielding |
| Color | Metallic Copper |
| Package Contents | 1 Roll of Shielding Tape |
| Compatibility | Electric Guitar Control Cavities |
| Weight | 3.5 oz (100g) |
Anonymous
Apr 14, 2026
Rating: 4/5
Good Product, Messy Application
The shielding effectiveness is top notch, but copper foil can be a bit tricky to handle without tearing. Wear gloves to avoid fingerprints on the adhesive.
Anonymous
Apr 08, 2026
Rating: 5/5
Perfect Fit for Cavities
The 2-inch width is perfect for most guitar control cavities. Less cutting required compared to narrower tapes. Conductive adhesive ensures a solid ground connection.
Anonymous
Feb 20, 2026
Rating: 5/5
Silenced My Single Coils
This tape works exactly as advertised. I lined the control cavity of my Strat and the hum is completely gone when I'm not touching the strings. Easy to apply and sticks well.
Anonymous
Feb 15, 2026
Rating: 5/5
Great Value for Money
One roll was enough to shield two guitars. The adhesive is strong and conductive, which is crucial for grounding. Highly recommend for DIY electronics work.
Anonymous
Feb 04, 2026
Rating: 5/5
Essential for High Gain
If you play with high gain settings, noise reduction is key. This tape eliminated the buzzing from my amp. Makes a huge difference in recording quality.
Q: Can I cut this tape with standard scissors?
A: Yes, standard household scissors work fine. Just be aware that copper residue may remain on the blades after cutting.
Q: Will this affect the tone of my pickups?
A: No, shielding tape reduces external noise interference without altering the natural tone or frequency response of your pickups.
Q: Is the adhesive safe for unfinished wood?
A: Yes, the acrylic adhesive is safe for wood cavities. However, we recommend testing a small area first if you are concerned about residue.
Q: Do I need to solder a ground wire to the tape?
A: Yes, for effective shielding, you should solder a ground wire from the tape to the main ground point of your guitar electronics.
Q: How many guitars can one roll shield?
A: Typically, one 30-foot roll is sufficient to fully shield the control cavities of 2 to 3 standard electric guitars.