Anonymous
Mar 31, 2026
Rating: 5/5
Best bang for your buck
As a university student, this affordable board allowed me to complete my final year project on real-time operating systems. It handles FreeRTOS perfectly. Shipping was fast too.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Development, Learning, Evaluation & Industrial Control Boards |
| Origin | - |
| Microcontroller | STM32F407ZGT6 (ARM Cortex-M4) |
| Main Frequency | 168 MHz |
| Flash Memory | 1 MB |
| SRAM | 192 KB + 4 KB Backup |
| IO Ports | 112 Fast I/O Ports |
| Communication Interfaces | 3x SPI, 3x I2S, 2x I2C, 3x USART, 2x UART, 2x CAN, 1x USB OTG |
| Timers | 12 Timers (including Advanced Control) |
| ADC Resolution | 12-bit, up to 24 channels |
| Operating Voltage | 3.3V (USB Powered or External 5V) |
| Debug Interface | JTAG/SWD Supported |
Anonymous
Mar 31, 2026
Rating: 5/5
Best bang for your buck
As a university student, this affordable board allowed me to complete my final year project on real-time operating systems. It handles FreeRTOS perfectly. Shipping was fast too.
Anonymous
Mar 31, 2026
Rating: 5/5
Excellent compatibility with HAL libraries
No issues setting up the environment. The board is recognized immediately by the ST-Link debugger. The 168MHz speed makes a huge difference compared to older M3 boards I have used.
Anonymous
Mar 12, 2026
Rating: 5/5
Robust industrial control solution
We used these boards for a prototype industrial controller. The multiple CAN buses and high-speed timers made motor control implementation straightforward. Very stable under continuous operation.
Anonymous
Mar 10, 2026
Rating: 4/5
Great value, minor documentation gaps
Hardware quality is solid and the chip is genuine. It runs complex DSP algorithms without lag. The only downside is that the included schematic could be more detailed for custom peripheral expansion.
Anonymous
Mar 02, 2026
Rating: 4/5
Good for robotics projects
Plenty of GPIOs for sensors and actuators. The floating point unit accelerates our navigation calculations. Would give 5 stars if it came with a protective case, but the bare board is fine for prototyping.
Anonymous
Mar 01, 2026
Rating: 5/5
Perfect for learning ARM Cortex-M4
This board is exactly what I needed to transition from Arduino to professional embedded development. The pinout is clearly labeled, and it works flawlessly with STM32CubeIDE. Highly recommended for students.
Q: Does this board come with an onboard ST-Link debugger?
A: No, this specific model does not include an onboard ST-Link V2. You will need an external ST-Link programmer or debugger to upload code and debug.
Q: Is this compatible with MicroPython?
A: Yes, the STM32F407ZGT6 is fully supported by MicroPython. You can flash the appropriate firmware binary to run Python scripts directly on the hardware.
Q: Can I use this board with Keil MDK?
A: Absolutely. This board is fully compatible with Keil MDK-ARM. You just need to select the STM32F407ZG device in your project settings and ensure the correct pack is installed.
Q: Are there example codes available for the Ethernet interface?
A: Yes, ST provides a comprehensive Hardware Abstraction Layer (HAL) library which includes examples for the Ethernet MAC peripheral. These can be found within the STM32CubeF4 package.
Q: What is the maximum input voltage for the VIN pin?
A: The board features an onboard regulator. You can supply 5V via the USB port or the VIN pin. Do not exceed 5.5V on the VIN pin to avoid damaging the regulator.