Anonymous
Mar 28, 2026
Rating: 3/5
Good but pricey
Functionality is good but slightly more expensive than similar boards without screens. You pay for the display convenience.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | ESP32-S3-WROOM-1 |
| Flash Memory | 8MB |
| PSRAM | 2MB |
| Display Type | 1.47 inch LCD |
| Resolution | 172 x 320 pixels |
| Wireless Connectivity | Wi-Fi 2.4GHz & Bluetooth 5 LE |
| Interface | USB Type-C |
| Input Voltage | 5V DC |
| Dimensions | 53.6 x 29 x 13.5 mm |
| Supported IDEs | Arduino IDE, ESP-IDF, MicroPython |
Anonymous
Mar 28, 2026
Rating: 3/5
Good but pricey
Functionality is good but slightly more expensive than similar boards without screens. You pay for the display convenience.
Anonymous
Mar 06, 2026
Rating: 5/5
Solid performance
The ESP32-S3 chip is much faster than the original ESP32. PSRAM helps with graphics. No overheating issues during testing.
Anonymous
Feb 27, 2026
Rating: 5/5
Perfect for IoT prototypes
Works flawlessly out of the box. The screen is bright and the Wi-Fi connection is stable. Highly recommend for home automation projects.
Anonymous
Feb 25, 2026
Rating: 4/5
Great board, minor docs issue
Hardware is excellent. Setup was easy using Arduino IDE. Only wish the wiki had more examples for the LCD library.
Anonymous
Jan 25, 2026
Rating: 5/5
Love the RGB LED
The RGB LED indicator is a nice touch for status signaling. USB-C makes programming convenient. Very satisfied.
Q: What is the max current for GPIO?
A: Each GPIO pin can provide up to 40mA. Total current consumption should be monitored.
Q: Does this support battery charging?
A: No, this board does not have a built-in lithium battery charging circuit. You need an external module.
Q: Is Windows driver needed?
A: Usually plug and play. If not recognized, install the CP210x or CH343 driver depending on the batch.
Q: Can I use 3.3V sensors?
A: Yes, the GPIO pins operate at 3.3V logic level. Ensure your sensors are compatible.
Q: Is the LCD touch sensitive?
A: No, the 1.47 inch display on this model is not touch-enabled. It is a standard LCD screen.