Anonymous
Mar 27, 2026
Rating: 4/5
Good value but docs could be better
Hardware is solid and performs well. Wiki documentation took some time to navigate for initial setup.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | ESP32-S3-WROOM-1 |
| Flash Memory | 16MB |
| PSRAM | 8MB Octal SPI |
| Display Size | 3.16-inch IPS LCD |
| Resolution | 384 x 672 pixels |
| Connectivity | WiFi 2.4GHz, Bluetooth 5 LE |
| Interface | USB Type-C |
| Sensors | 6-axis IMU (ICM-42670-P) |
| Storage Expansion | MicroSD Card Slot |
| Dimensions | 85.5 x 55.5 mm |
Anonymous
Mar 27, 2026
Rating: 4/5
Good value but docs could be better
Hardware is solid and performs well. Wiki documentation took some time to navigate for initial setup.
Anonymous
Mar 20, 2026
Rating: 5/5
Perfect HMI Solution
Used this for a home control panel. Touch response is accurate and the library support is comprehensive.
Anonymous
Feb 19, 2026
Rating: 5/5
Fast Shipping and Well Packed
Board arrived quickly. No dead pixels on the display and all pins were soldered correctly.
Anonymous
Jan 25, 2026
Rating: 4/5
Great features, no battery included
Love the RTC and IMU. Just note you need to buy a LiPo battery separately for portable use.
Anonymous
Jan 20, 2026
Rating: 5/5
Excellent for IoT Prototyping
The screen is crisp and the ESP32-S3 handles WiFi smoothly. Great board for building connected devices with a visual interface.
Q: Is the display touch capable?
A: Yes, it supports capacitive touch functionality out of the box.
Q: Is there an external antenna connector?
A: No, it primarily uses the onboard ceramic antenna for WiFi and Bluetooth.
Q: Can I connect a battery?
A: Yes, there is a PH2.0 connector available for connecting LiPo batteries.
Q: What is the logic level?
A: The GPIO pins operate at a 3.3V logic level.
Q: Does it support Arduino IDE?
A: Yes, it is fully compatible with Arduino IDE and also supports MicroPython.