Anonymous
Apr 14, 2026
Rating: 5/5
Excellent WiFi 6 Board
Works flawlessly with ESP-IDF. The WiFi 6 support is future-proof.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| CPU Architecture | RISC-V 32-bit |
| Flash Memory | 4 MB SPI Flash |
| Wireless Connectivity | WiFi 6 (802.11ax), Bluetooth 5.0 LE |
| GPIO Count | 22 Programmable Pins |
| Operating Voltage | 3.3V Logic Level |
| Input Power | 5V via USB Type-C |
| Board Dimensions | 56mm x 23mm x 10mm |
| Weight | Approximately 10 grams |
| Debug Interface | Built-in USB-to-UART Bridge |
| Software Support | ESP-IDF, Arduino, MicroPython |
Anonymous
Apr 14, 2026
Rating: 5/5
Excellent WiFi 6 Board
Works flawlessly with ESP-IDF. The WiFi 6 support is future-proof.
Anonymous
Mar 09, 2026
Rating: 5/5
Low power consumption
Measured current draw is impressive for sleep modes. Highly recommend.
Anonymous
Feb 28, 2026
Rating: 4/5
Great value but small text
Board works well, but the pinout labels are hard to read without a magnifier.
Anonymous
Feb 08, 2026
Rating: 5/5
Perfect for Home Automation
Integrated easily with Home Assistant. Stable connection.
Anonymous
Jan 27, 2026
Rating: 3/5
Good but needs patience
Documentation is sparse compared to ESP32-S3. Took time to set up.
Q: Is the USB cable included?
A: Yes, a USB Type-C to Type-A cable is included in the package.
Q: Compatible with Arduino IDE?
A: Yes, you can install the ESP32 board manager package to use Arduino IDE.
Q: Does this support Zigbee?
A: No, this model supports WiFi 6 and Bluetooth LE only. For Zigbee, please check our ESP32-C6-H series.
Q: What is the max current output per pin?
A: Please refer to the datasheet, but generally do not exceed 40mA per GPIO pin.
Q: Can I use 3.3V logic sensors directly?
A: Yes, the GPIO pins operate at 3.3V logic level.