Anonymous
Apr 04, 2026
Rating: 5/5
Great for MicroPython
Flashed instantly and ran my scripts without issues. The RGB LED is a nice touch for status indicators.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| CPU Architecture | RISC-V 32-bit |
| Display Size | 1.47 Inch IPS |
| Wi-Fi Standard | 802.11ax (Wi-Fi 6) |
| Bluetooth Version | 5.0 LE |
| Flash Memory | 4 MB |
| Interface | USB Type-C |
| Indicator | RGB LED |
| Input Power | 5V DC |
| GPIO Pins | 20 Available |
| IDE Support | Arduino, ESP-IDF, MicroPython |
Anonymous
Apr 04, 2026
Rating: 5/5
Great for MicroPython
Flashed instantly and ran my scripts without issues. The RGB LED is a nice touch for status indicators.
Anonymous
Feb 20, 2026
Rating: 5/5
Compact Design
Fits perfectly in my enclosure. The USB-C port is sturdy and the pinout is clearly labeled on the back.
Anonymous
Feb 15, 2026
Rating: 4/5
Nice Display
Screen is crisp but brightness could be higher for outdoor use. Otherwise, the board functions perfectly with Arduino IDE.
Anonymous
Feb 14, 2026
Rating: 3/5
Missing Battery Connector
Works well but needs external power since there is no dedicated battery connector on this version. Had to rig a solution.
Anonymous
Jan 23, 2026
Rating: 5/5
Excellent Wi-Fi 6 Performance
Connection is stable and fast. The Wi-Fi 6 support really makes a difference in congested networks. Highly recommend for IoT projects.
Q: Does this board support JTAG debugging?
A: Yes, the ESP32-C6 chip supports JTAG debugging via the USB interface.
Q: What is the maximum recommended current draw?
A: We recommend keeping the total current draw under 500mA when powered via USB.
Q: Can I drive DC motors directly with this board?
A: No, the GPIO current is limited. You should use a motor driver module to control DC motors safely.
Q: What is the exact resolution of the LCD?
A: The display resolution is 172 x 320 pixels.
Q: Is the GPIO logic level 3.3V or 5V?
A: The GPIO pins operate at 3.3V logic level. Please do not connect 5V signals directly to the pins.