Anonymous
Mar 14, 2026
Rating: 4/5
Good but docs needed work
Hardware is solid. Took some time to find the right libraries for the touchscreen. Works great now.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | ESP32-C6 |
| Flash Memory | 4MB |
| PSRAM | 2MB |
| Display Size | 1.47 inches |
| Resolution | 172 x 320 pixels |
| Touch Type | Capacitive |
| WiFi Standard | WiFi 6 (802.11ax) |
| Bluetooth | BLE 5.0 |
| Input Voltage | 5V via USB-C |
| Dimensions | 45 x 35 x 10 mm |
Anonymous
Mar 14, 2026
Rating: 4/5
Good but docs needed work
Hardware is solid. Took some time to find the right libraries for the touchscreen. Works great now.
Anonymous
Mar 13, 2026
Rating: 5/5
Excellent IoT Board
The WiFi 6 connectivity is stable and the screen is bright. Perfect for my dashboard project.
Anonymous
Feb 22, 2026
Rating: 4/5
Learning curve
My first ESP32 board. Some setup issues but support was helpful. Happy with the purchase.
Anonymous
Feb 12, 2026
Rating: 5/5
Great for ESPHome
Flashed ESPHome easily. The display drivers are well supported in the community.
Anonymous
Feb 07, 2026
Rating: 5/5
Best C6 board with screen
Compared to others, this has the best form factor. Touch response is quick.
Q: Can I power this with a battery?
A: Yes, there is a battery interface pin. Please refer to the schematic for voltage limits.
Q: Is the screen sunlight readable?
A: It is visible indoors well. Direct sunlight may reduce visibility due to gloss.
Q: Does this support Arduino IDE?
A: Yes, it is fully compatible with the Arduino IDE using the ESP32 board manager.
Q: Are GPIO pins accessible?
A: Yes, standard 2.54mm headers are provided for most GPIO pins.
Q: What cable is included?
A: The package includes a USB Type-C cable for programming and power.