Anonymous
Apr 10, 2026
Rating: 5/5
Fast Shipping and Quality
Arrived quickly. Tested GPIO toggling and Ethernet, all good. No issues with the USB connection.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| MCU Model | STM32F407VET6 |
| Core Type | ARM Cortex-M4 with FPU |
| Main Frequency | 168 MHz |
| Flash Memory | 512 KB |
| SRAM Capacity | 192 KB |
| GPIO Pins | 51 Available IOs |
| Communication | USB OTG, Ethernet, CAN, SPI, I2C, UART |
| Input Voltage | 5V (Micro USB or VIN pin) |
| Logic Level | 3.3V |
| Board Size | 55mm x 20mm |
Anonymous
Apr 10, 2026
Rating: 5/5
Fast Shipping and Quality
Arrived quickly. Tested GPIO toggling and Ethernet, all good. No issues with the USB connection.
Anonymous
Apr 10, 2026
Rating: 4/5
Good Value Board
Hardware is solid but documentation could be more detailed for beginners. Still recommended for the price.
Anonymous
Mar 07, 2026
Rating: 3/5
Pinout Labeling Small
The board works well but the silk screen for pins is a bit hard to read without a magnifier.
Anonymous
Feb 02, 2026
Rating: 5/5
Perfect IoT Starter
Using it for a home automation project. The Ethernet port is a huge plus compared to WiFi only boards.
Anonymous
Jan 21, 2026
Rating: 5/5
Excellent for STM32 Learning
Bought this for my embedded systems course. Works flawlessly with STM32CubeIDE and the pinout is standard.
Q: What is the operating voltage?
A: The logic level is 3.3V, but you can power it via 5V USB.
Q: Can I use Keil MDK with this?
A: Yes, this board is fully supported by Keil MDK-ARM and IAR EWARM.
Q: Does it have Ethernet capability?
A: Yes, the STM32F407VET6 chip includes an Ethernet MAC.
Q: Does this support Arduino IDE?
A: Yes, it is compatible with STM32Duino core in Arduino IDE.
Q: Is an ST-Link debugger included?
A: No, you need to purchase an ST-Link V2 or V3 programmer separately.