Anonymous
Mar 12, 2026
Rating: 5/5
Fast delivery and working
Arrived quickly and tested immediately. All GPIOs are functioning as expected.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller Model | STM32F103C8T6 |
| CPU Core | ARM Cortex-M3 32-bit RISC |
| Maximum Frequency | 72 MHz |
| Flash Memory | 64 KB |
| SRAM | 20 KB |
| GPIO Pins | 37 Programmable I/O Lines |
| ADC Resolution | 2 x 12-bit ADC |
| Communication Interfaces | USART, SPI, I2C, CAN, USB |
| Operating Voltage | 3.3V |
| Board Dimensions | 53mm x 23mm x 10mm |
Anonymous
Mar 12, 2026
Rating: 5/5
Fast delivery and working
Arrived quickly and tested immediately. All GPIOs are functioning as expected.
Anonymous
Mar 12, 2026
Rating: 4/5
Good value but no headers
The board itself is excellent, but remember to buy pin headers separately if you need them.
Anonymous
Feb 17, 2026
Rating: 3/5
Documentation could be better
Hardware is fine, but finding specific pin mapping took some time. Good for experienced users.
Anonymous
Feb 17, 2026
Rating: 5/5
Arduino IDE compatible
Successfully uploaded code using the Arduino IDE with the STM32duino bootloader. Very convenient.
Anonymous
Jan 30, 2026
Rating: 5/5
Perfect for embedded projects
This board works flawlessly with the STM32CubeIDE. Great pinout for my sensor project.
Q: Are pin headers included in the package?
A: This listing is for the core board only. Pin headers are not included but can be purchased separately.
Q: What programmer do I need for this board?
A: We recommend using an ST-Link V2 programmer for flashing firmware via the SWD interface.
Q: Can I run MicroPython on this?
A: Yes, STM32F103 series supports MicroPython, though memory limits may apply compared to larger boards.
Q: Does this support the Arduino IDE?
A: Yes, this board can be programmed using the Arduino IDE with the appropriate STM32 core installed.
Q: Is the logic level 5V tolerant?
A: No, the GPIO pins operate at 3.3V logic levels. Use a level shifter for 5V devices.