Anonymous
Apr 03, 2026
Rating: 5/5
Fast delivery and good condition
Arrived quickly and was well packaged. Tested it immediately with my UNO board and it controlled the fan speed perfectly.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Chip Model | L9110S |
| Operating Voltage | DC 2.5V - 12V |
| Logic Voltage | 5V TTL Level |
| Continuous Current | 800mA per channel |
| Peak Current | 1.5A |
| Interface Type | 4-Pin PH2.0 Connector |
| Compatibility | Arduino UNO, Nano, Mega |
| PCB Dimensions | 27mm x 27mm |
| Weight | 4.5 grams |
| Application | DC Motor, Fan, Robotics |
Anonymous
Apr 03, 2026
Rating: 5/5
Fast delivery and good condition
Arrived quickly and was well packaged. Tested it immediately with my UNO board and it controlled the fan speed perfectly.
Anonymous
Mar 22, 2026
Rating: 5/5
Works great for robot cars
I used this module to control the motors on my Arduino-based robot car. It was easy to wire and the code examples online were helpful. No issues with overheating during normal use.
Anonymous
Feb 09, 2026
Rating: 5/5
Reliable driver for small motors
Perfect for small DC motors within the current limit. I am using it for a automation project and it responds quickly to PWM signals.
Anonymous
Jan 27, 2026
Rating: 4/5
Good module, pins need soldering
The driver works as expected for my cooling fan project. Just note that you need to solder the header pins yourself if you want to plug it into a breadboard easily.
Anonymous
Jan 20, 2026
Rating: 3/5
Okay but gets warm
It functions correctly, but the chip does get noticeably warm when driving motors near the 800mA limit. Make sure you have some airflow.
Q: Are jumper wires included in the package?
A: No, the package includes only the motor driver module. You will need to provide your own jumper wires or connectors.
Q: Can this drive two motors simultaneously?
A: Yes, the L9110S chip has dual channels, allowing you to control two DC motors independently at the same time.
Q: What is the acceptable voltage range for the motor?
A: The module supports a motor voltage range from DC 2.5V to 12V. Please ensure your motor falls within this specification.
Q: Does it come with heat sinks attached?
A: No, the module does not come with additional heat sinks. The PCB is designed to dissipate heat for continuous currents up to 800mA.
Q: Is this compatible with 3.3V logic boards?
A: It is primarily designed for 5V TTL logic. While it may work with 3.3V, we recommend using it with 5V microcontrollers like Arduino UNO for best performance.