Anonymous
Mar 21, 2026
Rating: 5/5
Compatible with all my shields
I tested this with several motor driver shields and sensor modules. The pin spacing is standard and everything fit perfectly. Highly recommended.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | ATmega328P |
| USB Interface Chip | CH340 |
| Operating Voltage | 5V |
| Input Voltage (Recommended) | 7-12V |
| Digital I/O Pins | 14 |
| PWM Pins | 6 |
| Analog Input Pins | 6 |
| Flash Memory | 32 KB |
| SRAM | 2 KB |
| Clock Speed | 16 MHz |
Anonymous
Mar 21, 2026
Rating: 5/5
Compatible with all my shields
I tested this with several motor driver shields and sensor modules. The pin spacing is standard and everything fit perfectly. Highly recommended.
Anonymous
Mar 03, 2026
Rating: 3/5
Works but headers not soldered
The board functions correctly, but I was surprised that the pin headers were not pre-soldered. I had to do that myself before using it.
Anonymous
Feb 05, 2026
Rating: 4/5
Good board, driver installation needed
The hardware is solid, but make sure you install the CH340 drivers before connecting it to your computer. Once that was done, it worked flawlessly.
Anonymous
Feb 05, 2026
Rating: 5/5
Perfect for learning electronics
This board works exactly like the original Arduino UNO. I used it for a school project and had no issues uploading sketches. Great value for the price.
Anonymous
Jan 18, 2026
Rating: 5/5
Fast delivery and well packaged
Arrived quickly and was protected well in anti-static packaging. The board looks clean and the soldering quality is good.
Q: Can I power this with a 9V battery?
A: Yes, you can power the board using a 9V battery connected to the barrel jack or the VIN pin.
Q: Are the logic levels 3.3V or 5V?
A: The I/O pins operate at 5V logic levels. Please be cautious when connecting 3.3V sensors without a level shifter.
Q: What type of USB cable do I need?
A: You will need a standard USB Type-A to Type-B cable, commonly used for printers and older scanners.
Q: Does it work on macOS?
A: Yes, it works on macOS. However, you might need to install specific drivers for the CH340 chip depending on your OS version.
Q: Is this compatible with the Arduino IDE?
A: Yes, this board is fully compatible with the Arduino IDE. You may need to select the appropriate board type and install CH340 drivers.