Anonymous
Mar 28, 2026
Rating: 4/5
Good hardware, tricky setup
Drivers took some finding but board quality is high.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Interface Protocol | GMSL2 Serial Link |
| Host Compatibility | Raspberry Pi 4, Jetson Nano/Xavier |
| Camera Sensor Model | OV5640 CMOS |
| Maximum Resolution | 1080p @ 30fps |
| Power Input | 5V DC via GPIO or Barrel Jack |
| Connector Style | FAKRA Z-code Coaxial |
| Primary Chipset | Maxim MAX96717 / MAX9295 |
| Operating Temperature | -40°C to 85°C Industrial |
| Board Dimensions | 80mm x 50mm x 15mm |
| Cable Length Provided | 1 Meter Shielded Coaxial |
Anonymous
Mar 28, 2026
Rating: 4/5
Good hardware, tricky setup
Drivers took some finding but board quality is high.
Anonymous
Mar 21, 2026
Rating: 5/5
Solid build quality
Very sturdy connectors. Feels like industrial grade.
Anonymous
Mar 20, 2026
Rating: 5/5
Excellent for Jetson
Works flawlessly with Xavier NX. The GMSL connection is stable.
Anonymous
Mar 08, 2026
Rating: 3/5
Documentation lacking
Had to guess some pins. Wiki needs update.
Anonymous
Feb 06, 2026
Rating: 5/5
Perfect for prototyping
Saved us weeks of dev time on our automotive project.
Q: Can I daisy chain boards?
A: Yes, GMSL supports daisy chaining multiple units.
Q: Is the camera included?
A: Yes, OV5640 module is bundled in the kit.
Q: Is 12V power supported?
A: No, please use 5V DC only to avoid damage.
Q: Does this support Pi 3?
A: No, requires Pi 4 or Jetson due to bandwidth.
Q: What cable type is needed?
A: Coaxial with FAKRA Z-code connector is required.