Anonymous
Mar 29, 2026
Rating: 5/5
Excellent Support
The community support for this chip is amazing. I was able to find libraries for every sensor I wanted to use. Boot times are fast.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| CPU Type | Dual-Core Tensilica LX6 |
| Clock Speed | 240 MHz |
| Flash Memory | 4 MB |
| SRAM | 520 KB |
| WiFi Standard | 802.11 b/g/n (2.4 GHz) |
| Bluetooth Version | v4.2 BR/EDR and BLE |
| GPIO Pins | 34 Programmable Pins |
| Input Voltage | 5V DC (via Micro USB) |
| Logic Level | 3.3V |
| Board Dimensions | 55mm x 28mm x 13mm |
Anonymous
Mar 29, 2026
Rating: 5/5
Excellent Support
The community support for this chip is amazing. I was able to find libraries for every sensor I wanted to use. Boot times are fast.
Anonymous
Mar 13, 2026
Rating: 3/5
Warm Operation
Functionality is fine, but it gets hotter than expected under continuous load. Make sure to provide adequate ventilation in your enclosure.
Anonymous
Jan 29, 2026
Rating: 5/5
IoT Ready
Connected easily to my MQTT broker. The dual-core processing helps manage network tasks without blocking sensor readings. Very satisfied.
Anonymous
Jan 28, 2026
Rating: 5/5
Great Board for IoT
Works perfectly with the Arduino IDE. WiFi connection is stable and Bluetooth pairing was straightforward. Highly recommend for home automation projects.
Anonymous
Jan 22, 2026
Rating: 4/5
Good Value
Solid performance for the price. The pinout diagram could be clearer, but once configured, it runs smoothly. Gets slightly warm during heavy WiFi use.
Q: Does this model support an external antenna?
A: No, this specific model uses an onboard PCB antenna. There is no connector for an external antenna on this version.
Q: Are the GPIO pins 5V tolerant?
A: No, the GPIO pins operate at 3.3V logic level. Applying 5V directly to the pins may damage the board. Use a level shifter if needed.
Q: What is the current consumption in Deep Sleep mode?
A: In Deep Sleep mode, the board consumes approximately 10 microamps, depending on the specific configuration and peripherals used.
Q: Is this board compatible with the Arduino IDE?
A: Yes, this ESP-32 board is fully compatible with the Arduino IDE. You will need to install the ESP32 board manager package.
Q: Is a USB cable included in the package?
A: No, the USB cable is sold separately. You will need a standard Micro USB cable to power and program the board.