Anonymous
Mar 07, 2026
Rating: 5/5
Perfect for my clock project
Works flawlessly with the FastLED library. The colors are vibrant and the addressing is accurate for every pixel.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| LED Model | WS2812B 5050 RGB |
| Matrix Configuration | 8x8 Pixels |
| Total LED Count | 64 Units |
| Operating Voltage | 5V DC |
| Control Interface | Single-wire Digital Signal |
| Color Depth | 24-bit (8-bit per channel) |
| PCB Dimensions | 50mm x 50mm |
| Mounting Holes | 4x 3mm Diameter |
| Compatible Platforms | Arduino, ESP32, Raspberry Pi |
| Package Contents | 1x LED Matrix Board |
Anonymous
Mar 07, 2026
Rating: 5/5
Perfect for my clock project
Works flawlessly with the FastLED library. The colors are vibrant and the addressing is accurate for every pixel.
Anonymous
Mar 04, 2026
Rating: 5/5
Great quality PCB
No dead pixels out of the box. The board layout is clean and allows for easy daisy chaining with other modules.
Anonymous
Feb 24, 2026
Rating: 5/5
Easy to integrate
Soldering pads are large enough for beginners. Connected it to an ESP32 without any level shifting issues.
Anonymous
Feb 08, 2026
Rating: 4/5
Good value
Needs a decent power supply if you plan to light all LEDs at full white brightness, but otherwise works great.
Anonymous
Feb 01, 2026
Rating: 5/5
Bright and vibrant
Colors are very accurate and brightness is sufficient for indoor displays. Easy to solder headers onto.
Q: Can I chain multiple matrices together?
A: Yes, you can connect the DO (Data Out) pin of one board to the DI (Data In) pin of the next.
Q: What power supply do you recommend for this board?
A: We recommend a 5V 2A power supply if you plan to run all LEDs at high brightness.
Q: Is this board waterproof for outdoor use?
A: No, this board is not waterproof and is designed for indoor development and prototyping only.
Q: Does this require a logic level shifter for 3.3V boards?
A: While it often works directly, we recommend a logic level shifter for stable performance with 3.3V microcontrollers.
Q: Is this compatible with the Adafruit NeoPixel library?
A: Yes, this board uses WS2812B LEDs which are fully compatible with the Adafruit NeoPixel library.