Anonymous
Feb 18, 2026
Rating: 4/5
Solid Performance
Runs hot under full load but performs well. Make sure you have adequate cooling in your setup. The SFP+ ports work great with standard modules.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| FPGA Model | Xilinx Kintex UltraScale XCKU060 |
| System Logic Cells | 290,000 CLBs |
| DDR4 Memory | 4GB Total (2x 2GB SODIMM) |
| PCIe Interface | Gen3 x8 Edge Connector |
| Network Interface | 2x 10G SFP+ Cages |
| Flash Storage | 512MB Quad SPI Flash |
| Debug Interface | Onboard USB-JTAG |
| Power Supply | 12V DC Input |
| Expansion Slot | 1x FMC HPC Connector |
| Dimensions | 140mm x 100mm |
Anonymous
Feb 18, 2026
Rating: 4/5
Solid Performance
Runs hot under full load but performs well. Make sure you have adequate cooling in your setup. The SFP+ ports work great with standard modules.
Anonymous
Feb 11, 2026
Rating: 5/5
Best Kintex Board Available
Excellent signal integrity and build quality. I have used several boards from different vendors and this one stands out for reliability.
Anonymous
Feb 08, 2026
Rating: 4/5
Great Hardware, Docs Need Work
Board works flawlessly but examples are sparse. Had to dig into the schematics to get started. Once configured, performance is top notch.
Anonymous
Feb 03, 2026
Rating: 5/5
Powerful Board for PCIe Dev
Exactly what I needed for my DMA project. The PCIe interface is stable and the build quality is excellent. Highly recommend for serious FPGA developers.
Anonymous
Jan 22, 2026
Rating: 5/5
Perfect for Research
Using it for signal processing research at our university. The memory bandwidth is sufficient for our algorithms. Very satisfied.
Q: Can I use Linux drivers?
A: Yes, open source drivers and example projects for Linux are available in our GitHub repository.
Q: Does it include a power adapter?
A: Yes, a 12V 2A power adapter is included in the package along with the USB cable.
Q: Is the FMC connector VADJ adjustable?
A: Yes, the FMC HPC connector supports VADJ adjustment from 1.2V to 3.3V via jumpers.
Q: Is Vivado 2023 supported?
A: Yes, this board is fully compatible with Vivado 2023 and later versions. Board files are available on our website.
Q: What is the power consumption?
A: Typical consumption is around 15W, with a maximum of 25W under full load depending on the FPGA design.