Anonymous
Apr 21, 2026
Rating: 4/5
Good Quality
Solid aluminum construction feels premium. Took off one star because the set screws were a bit tight to adjust initially.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Connectors and Fasteners |
| Origin | - |
| Material | Aluminum Alloy |
| Coupling Type | Cross-Slider (Oldham) |
| Series | CPOC Series |
| Shaft Bore Range | 5mm - 25mm |
| Rated Torque | Up to 50 Nm |
| Maximum RPM | 4000 RPM |
| Electrical Resistance | 1 MΩ Minimum |
| Operating Temperature | -10°C to 80°C |
| Weight | 125 grams (Average) |
| Country of Origin | Japan |
Anonymous
Apr 21, 2026
Rating: 4/5
Good Quality
Solid aluminum construction feels premium. Took off one star because the set screws were a bit tight to adjust initially.
Anonymous
Apr 02, 2026
Rating: 4/5
Fast Delivery
Product matches description perfectly. Shipping was faster than expected. Would buy again for future projects.
Anonymous
Mar 07, 2026
Rating: 5/5
Zero Backlash
Perfect for servo motors where precision is key. The cross-slider design handles the misalignment well.
Anonymous
Mar 05, 2026
Rating: 5/5
Insulation Verified
I specifically needed electrical insulation between motor and screw. Tested with a multimeter and it holds resistance as advertised.
Anonymous
Jan 24, 2026
Rating: 5/5
Excellent Precision
Works great on my CNC router setup. The alignment was perfect out of the box and there is no noticeable backlash.
Q: Is additional grease required before installation?
A: No, the unit comes pre-lubricated from the factory and is ready for immediate use.
Q: Can it handle parallel misalignment?
A: Yes, the cross-slider design compensates for both parallel and angular misalignment.
Q: Are set screws included with the coupling?
A: Yes, two set screws are included for each hub to secure the shaft connection.
Q: What is the recommended shaft hardness?
A: We recommend a shaft hardness of HRC 25 or higher for optimal grip and durability.
Q: What is the exact electrical insulation value?
A: The coupling provides a minimum electrical resistance of 1 Megaohm between shafts.