Anonymous
Apr 07, 2026
Rating: 5/5
Perfect for my Arduino Bot
Works exactly as described. Easy to calibrate the sensitivity potentiometer. Used it for a line follower project and it tracks well on black tape.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Sensor Model | TCRT5000 Infrared Reflective |
| Working Voltage | 3.3V - 5V DC |
| Output Signal | Digital Switching Output (0 and 1) |
| Detection Range | 1mm - 25mm (Adjustable) |
| Comparator IC | LM393 Wide Voltage Comparator |
| PCB Dimensions | 32mm x 14mm x 10mm |
| Mounting Hole | 3mm Diameter |
| LED Indicators | Power LED and Output Status LED |
| Connection Interface | 3-Pin Pinhead (VCC, GND, OUT) |
| Net Weight | 3 grams |
Anonymous
Apr 07, 2026
Rating: 5/5
Perfect for my Arduino Bot
Works exactly as described. Easy to calibrate the sensitivity potentiometer. Used it for a line follower project and it tracks well on black tape.
Anonymous
Feb 16, 2026
Rating: 5/5
Reliable module
We use these in our workshop for beginner kits. They are durable and handle 5V logic well. Highly recommend for education purposes.
Anonymous
Feb 07, 2026
Rating: 5/5
Great for learning projects
Bought this for my university robotics project. Very responsive to contrast changes. No issues with wiring to the microcontroller.
Anonymous
Feb 03, 2026
Rating: 4/5
Works well indoors
Sensitive to strong ambient light sometimes, but works great indoors. Adjusting the pot helps reduce false triggers significantly.
Anonymous
Feb 03, 2026
Rating: 4/5
Good value for money
Solid sensor for the price. Detection range is short but sufficient for obstacle avoidance. Wish the jumper cables were included in the package.
Q: What is the maximum detection distance?
A: The effective range is typically up to 25mm depending on surface reflectivity and ambient light conditions.
Q: Can I use this for detecting water levels?
A: This is designed for reflective surfaces like lines or solid obstacles. It is not recommended for liquids or water level detection.
Q: Does it come with jumper wires?
A: No, the module is sold separately. Standard 3-pin female-to-female jumper wires are required for connection.
Q: Is this compatible with Raspberry Pi GPIO?
A: Yes, it works with Raspberry Pi GPIO pins using 3.3V logic. Ensure you connect the VCC to the 3.3V pin.
Q: How do I adjust the sensitivity?
A: Use the blue potentiometer on the board. Turn clockwise to increase sensitivity and counter-clockwise to decrease it.