Anonymous
Apr 07, 2026
Rating: 3/5
Arrived damaged
One pin was bent on arrival, but sensor still works after straightening.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Type | I2C |
| Operating Voltage | 2.2V to 5.5V DC |
| Humidity Range | 0% to 100% RH |
| Temperature Range | -40°C to +85°C |
| Humidity Accuracy | ±2% RH (typical) |
| Temperature Accuracy | ±0.5°C (typical) |
| Response Time | Less than 8 seconds |
| Power Consumption | 50 μA during measurement |
| Pin Configuration | 4 Pins (VCC, GND, SDA, SCL) |
| Module Weight | 3 grams |
Anonymous
Apr 07, 2026
Rating: 3/5
Arrived damaged
One pin was bent on arrival, but sensor still works after straightening.
Anonymous
Apr 07, 2026
Rating: 5/5
Great SHT20 alternative
Cost effective and performs similarly to the more expensive SHT20 modules.
Anonymous
Feb 27, 2026
Rating: 5/5
Perfect for Arduino
Works flawlessly with my Uno board. Easy library integration and stable readings.
Anonymous
Feb 18, 2026
Rating: 4/5
Good sensor
Slightly slower response than expected but accurate enough for my home station.
Anonymous
Feb 04, 2026
Rating: 5/5
Stable readings
Very stable data over long periods. Great for data logging projects.
Q: Which library do you recommend?
A: The Adafruit SHT31 library is often compatible and works well.
Q: What is the default I2C address?
A: The default hexadecimal address is 0x38.
Q: Is 5V logic safe for this module?
A: Yes, the module supports voltage levels up to 5.5V safely.
Q: Does it need user calibration?
A: No, the sensor is factory calibrated and ready to use.
Q: Can I use this sensor outdoors?
A: It is not waterproof and requires a protective enclosure for outdoor use.