Anonymous
Apr 09, 2026
Rating: 5/5
Easy PC Interface
Plug and play with the provided software. Great for quick force testing without microcontrollers.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Sensor Type | FlexiForce Thin-Film |
| Communication Interface | USB Serial (UART) |
| Output Signal | Analog Voltage & Digital Serial |
| Force Range | 0 - 100 lbs (approx. 445 N) |
| Operating Voltage | 3.3V - 5V DC |
| Operating Temperature | -40°C to 85°C |
| Film Thickness | 0.208 mm |
| Active Area | 0.5 inch diameter |
| Response Time | < 5 microseconds |
| Connector Type | 1mm Pitch FPC |
Anonymous
Apr 09, 2026
Rating: 5/5
Easy PC Interface
Plug and play with the provided software. Great for quick force testing without microcontrollers.
Anonymous
Mar 16, 2026
Rating: 4/5
Good sensitivity
Nice module but calibration takes time. Once set up, the readings are consistent.
Anonymous
Feb 26, 2026
Rating: 3/5
Decent but fragile
Sensor works well but the film tears easily if handled roughly. Be careful during installation.
Anonymous
Jan 30, 2026
Rating: 5/5
Excellent Precision
Very stable readings for force measurement. Used it for a university project and got an A.
Anonymous
Jan 27, 2026
Rating: 5/5
Perfect for Robotics
Works great with my Arduino project. The serial communication makes data logging very easy.
Q: Is it waterproof?
A: No, this module is not rated for water exposure. Keep it in dry environments.
Q: Can I cut the sensor film?
A: No, cutting the active area will damage the circuit and void the warranty.
Q: Is driver software included?
A: Yes, downloadable software is available on our product support page.
Q: What is the max weight it can measure?
A: The sensor is rated up to 100 lbs. Exceeding this may damage the film.
Q: Does this work with Raspberry Pi?
A: Yes, it connects via USB serial interface which is compatible with Raspberry Pi.