A
Anonymous
Mar 15, 2026
Rating: 5/5
Great value module
Easy to wire up with a microcontroller. The analog output is smooth and easy to calibrate.
Description
Thermistor Sensor Module, Temperature Measurement MCU Module, Thermal Control
Reviews
Attributes
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Sensor Type | NTC Thermistor |
| Nominal Resistance | 10kΩ @ 25°C |
| B-Constant | 3950K |
| Operating Voltage | 3.3V - 5V DC |
| Output Signal | Analog Voltage |
| Temperature Range | -55°C to +125°C |
| Resistance Tolerance | ±1% |
| Interface Connector | PH2.0 3-Pin |
| PCB Dimensions | 32mm x 14mm x 4mm |
| Weight | 3.5 grams |
5 reviews
A
Anonymous
Feb 27, 2026
Rating: 5/5
Son loves it for school
Bought this for my son's science fair project. It was easy to set up with his board.
A
Anonymous
Feb 16, 2026
Rating: 5/5
Perfect for climate monitoring
Integrated this into my home weather station. Readings are consistent and match my other sensors.
A
Anonymous
Jan 30, 2026
Rating: 4/5
Good accuracy
Works well for general purpose sensing. Not industrial grade but perfect for hobby projects.
A
Anonymous
Jan 27, 2026
Rating: 5/5
Reliable for motor cooling
We use these to monitor motor temperatures in our competition robots. No failures so far.
5 FAQ
Q: What is the length of the included cable?
A: The module comes with a 20cm connecting cable with a PH2.0 connector.
Q: Is this compatible with Arduino Uno?
A: Yes, this module works perfectly with Arduino Uno using the analog input pins.
Q: What is the response time?
A: The thermal response time is approximately 5 seconds in still air.
Q: Can this measure water temperature?
A: The sensor element can, but the PCB is not waterproof. You must seal it for liquid use.
Q: Do I need an external resistor?
A: No, the module includes the necessary voltage divider resistors on the PCB.
![[Corrosion-Resistant] DFRobot Capacitive Soil Moisture Sensor Module Dry/Wet Detection](https://www.gosteppe.com/cache/medium/product/3259/legacy-main-2f0d3454b36b32391d263648.webp)
![[Camizong] Lilith's Claw – Gothic-Style Fork Acrylic Check-In Stick for Badge Display with Magnetic Backing](https://www.gosteppe.com/cache/small/product/269664/legacy-main-61a7c901e7dad39a31ac652a.png)
