A
Anonymous
Apr 08, 2026
Rating: 5/5
Reliable for control panels
We use these in small batch control units. They hold calibration well over time.
Description
Thermistor Sensor Module featuring 4 pins and a 4-wire temperature sensing configuration
Reviews
Attributes
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Sensor Type | NTC Thermistor |
| Configuration | 4-Wire Kelvin |
| Nominal Resistance | 10k Ohm @ 25°C |
| Beta Value | 3950K |
| Temperature Range | -40°C to +150°C |
| Accuracy Tolerance | ±1% |
| Wire Gauge | 24 AWG |
| Cable Length | 1000mm |
| Probe Material | Stainless Steel |
| Termination Style | Bare Wire Ends |
5 reviews
A
Anonymous
Apr 04, 2026
Rating: 5/5
Excellent stability for 3D printing
The 4-wire configuration eliminates noise issues I had with previous 2-wire sensors. Temp readings are consistent.
A
Anonymous
Mar 28, 2026
Rating: 4/5
Accurate but cable could be longer
Measurement accuracy is top notch. Would prefer a 1.5m option for larger enclosures.
A
Anonymous
Mar 05, 2026
Rating: 5/5
Perfect replacement part
Matched the specs of my original sensor perfectly. Easy to solder onto the PCB.
A
Anonymous
Mar 02, 2026
Rating: 4/5
Good sensor, wiring takes care
Works well with my Arduino project. Just make sure you identify the correct pairs for the Kelvin connection.
5 FAQ
Q: Can I use this with a standard 2-pin connector?
A: Yes, you can use two pins for basic operation, but the 4-wire accuracy benefits will be lost.
Q: How do I identify the wire pairs?
A: Typically, the two black wires are one pair and the two red wires are the other. Please check the datasheet for confirmation.
Q: Is the probe tip waterproof?
A: The probe tip is epoxy sealed and resistant to moisture, but the wire junction is not submersible.
Q: What is the maximum current this sensor can handle?
A: This is a passive sensor. Please ensure the excitation current does not exceed 1mA to prevent self-heating.
Q: Does this work with 3.3V logic boards?
A: Yes, this sensor is compatible with both 3.3V and 5V logic systems when used with appropriate pull-up resistors.
![[Corrosion-Resistant] DFRobot Capacitive Soil Moisture Sensor Module Dry/Wet Detection](https://www.gosteppe.com/cache/medium/product/3259/legacy-main-2f0d3454b36b32391d263648.webp)
![[Ali Health] Dental Implant Initial Consultation Package, Oral Cavity Filling, Crown, Denture, and Implant Assessment](https://www.gosteppe.com/cache/small/product/268910/legacy-main-034f7c58b79ebda262b6a7f8.png)
