Anonymous
Apr 04, 2026
Rating: 4/5
Good accuracy, slow sampling
Data is accurate compared to my thermostat. Just remember it only updates every 2 seconds.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Sensor Model | DHT22 (AM2302) |
| Operating Voltage | 3.3V - 5V DC |
| Interface Type | Single-wire Digital |
| Temperature Range | -40°C to 80°C |
| Humidity Range | 0% to 100% RH |
| Temperature Accuracy | ±0.5°C |
| Humidity Accuracy | ±2% RH |
| Sampling Period | 2 Seconds (0.5Hz) |
| Pin Configuration | 3-Pin Module (VCC, DATA, GND) |
| Compatible Platforms | Arduino, ESP32, ESP8266, Raspberry Pi |
Anonymous
Apr 04, 2026
Rating: 4/5
Good accuracy, slow sampling
Data is accurate compared to my thermostat. Just remember it only updates every 2 seconds.
Anonymous
Mar 25, 2026
Rating: 5/5
Perfect for Arduino Weather Station
Works flawlessly with my Arduino Uno. The library support is excellent and readings are stable.
Anonymous
Mar 24, 2026
Rating: 3/5
Needed pull-up resistor
Worked after I added an external pull-up resistor. Instructions could be clearer on that point.
Anonymous
Mar 11, 2026
Rating: 5/5
Great value module
The shield board makes wiring much easier than the raw sensor. Highly recommend for beginners.
Anonymous
Jan 28, 2026
Rating: 5/5
Reliable for ESP32 projects
Using this in my living room monitor. Stable connection over WiFi using ESP32.
Q: Is the cable included?
A: This module does not include extension cables, only the board itself.
Q: What is the pinout order?
A: From front to back: VCC, DATA, GND. Check the silkscreen on the board.
Q: Which library should I use?
A: We recommend the standard DHT sensor library by Adafruit.
Q: Can I use this outdoors?
A: The sensor is not waterproof. Please use a protective enclosure for outdoor use.
Q: Does this work with 3.3V logic?
A: Yes, it operates between 3.3V and 5V DC.