Anonymous
Apr 09, 2026
Rating: 5/5
Reliable light detection
Used this for a night light project. Very consistent triggering when ambient light drops.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 3.3V to 5V DC |
| Output Type | Digital Switching Output (TTL) |
| Pin Interface | 3-Pin or 4-Pin Header |
| Sensor Type | GL5528 Photoresistor |
| Comparator IC | LM393 Wide Voltage Comparator |
| PCB Dimensions | 32mm x 14mm x 5mm |
| Mounting Hole | 3mm Diameter |
| Sensitivity Control | Adjustable via Potentiometer |
| Included Cables | 20cm Dupont Wires |
| Weight | Approximately 5g |
Anonymous
Apr 09, 2026
Rating: 5/5
Reliable light detection
Used this for a night light project. Very consistent triggering when ambient light drops.
Anonymous
Apr 05, 2026
Rating: 5/5
Great for Arduino Projects
Works perfectly with my Uno board. Sensitivity is easy to adjust using the onboard potentiometer.
Anonymous
Mar 11, 2026
Rating: 3/5
Potentiometer is tight
Functionality is fine but the adjustment screw is hard to turn without a small screwdriver.
Anonymous
Feb 16, 2026
Rating: 5/5
Exactly as described
Fast shipping and the module matches the description perfectly. Good value for money.
Anonymous
Jan 30, 2026
Rating: 4/5
Good sensor, short wires
The module works well but the included wires are a bit short for my specific enclosure setup.
Q: Are the pins labeled clearly?
A: Yes, VCC, GND, and DO are printed clearly on the PCB silk screen.
Q: Does it output analog values?
A: No, this specific module outputs digital high/low signals only.
Q: Can I remove the LED indicator?
A: Yes, you can desolder it to reduce power consumption if needed.
Q: Is this compatible with 3.3V logic?
A: Yes, the module operates securely between 3.3V and 5V DC.
Q: What is the detection range?
A: It depends on ambient light, typically effective within 1 meter for strong sources.