Anonymous
Mar 30, 2026
Rating: 3/5
Works but needs calibration
Out of the box, the readings were a bit off. After spending time calibrating it according to the wiki, it performed much better. Just be prepared to tune it.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Type | UART/TTL |
| Operating Voltage | 3.3V - 5V DC |
| Sensor Axes | 10-Axis (Accel, Gyro, Mag, Pressure) |
| Communication Protocol | MODBUS/ASCII |
| Baud Rate Support | 9600 - 115200 bps |
| Module Dimensions | 22mm x 17mm x 3mm |
| Operating Temperature | -40°C to 85°C |
| Static Accuracy | 0.01° |
| Data Update Rate | 1Hz - 200Hz |
| Package Weight | 15g (with cable) |
Anonymous
Mar 30, 2026
Rating: 3/5
Works but needs calibration
Out of the box, the readings were a bit off. After spending time calibrating it according to the wiki, it performed much better. Just be prepared to tune it.
Anonymous
Mar 13, 2026
Rating: 4/5
Good sensor, documentation could be better
Hardware works great and seems precise. However, the English manual was a bit hard to follow initially. Once I figured out the protocol, it worked flawlessly.
Anonymous
Mar 13, 2026
Rating: 5/5
Perfect for my robotics project
The accuracy is impressive for the price. I used it for a self-balancing robot and the angle data is very stable. Setup was straightforward with the provided software.
Anonymous
Feb 27, 2026
Rating: 5/5
Fast shipping and great product
Arrived quickly and well packaged. The module is compact and fits easily into my custom PCB design. Data output is consistent and reliable.
Anonymous
Feb 27, 2026
Rating: 5/5
Excellent stability
I've tested several IMU modules and this one offers great value. The magnetometer calibration was easy to perform. Highly recommend for drone stabilization.
Q: Is the connector pinned standard?
A: It uses a standard 4-pin header interface. The pinout is clearly labeled on the PCB silk screen for VCC, GND, TX, and RX.
Q: Does it come with calibration software?
A: Yes, we provide PC software for configuration and calibration. You can download it from the link included in the package documentation.
Q: Can I change the data output frequency?
A: Yes, the update rate is configurable from 1Hz to 200Hz using the configuration software or via serial commands.
Q: Is this module compatible with Arduino Uno?
A: Yes, it is compatible. You can connect it via UART using the TX/RX pins. Ensure you use a logic level converter if needed for 5V systems.
Q: What is the maximum vibration this sensor can withstand?
A: The module is designed for standard industrial and hobbyist applications. It can withstand typical drone or robot vibrations but is not rated for extreme shock environments.