Anonymous
Apr 09, 2026
Rating: 5/5
Great value pack
Bought multiple colors to indicate different states. Quality is solid for the price.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 3.3V - 5V DC |
| Forward Current | 20mA |
| LED Diameter | 10mm |
| Available Colors | Red, Yellow, Blue, Green, White |
| Interface Type | 3-Pin Header (GND, VCC, Signal) |
| PCB Material | FR-4 Fiberglass |
| Module Dimensions | 24mm x 15mm x 5mm |
| Weight | 2 grams |
| Compatibility | Arduino, Raspberry Pi, ESP32, ESP8266 |
| Mounting Hole Size | 3mm |
Anonymous
Apr 09, 2026
Rating: 5/5
Great value pack
Bought multiple colors to indicate different states. Quality is solid for the price.
Anonymous
Mar 15, 2026
Rating: 4/5
Bright but needs attention
Very bright LED, almost too bright for indoor use. Works well though.
Anonymous
Mar 01, 2026
Rating: 5/5
Arduino ready
Plug and play with standard sensor shields. No extra components needed.
Anonymous
Feb 26, 2026
Rating: 3/5
Pinout unclear
Had to check the schematic online to confirm pin order. Works once wired correctly.
Anonymous
Feb 11, 2026
Rating: 5/5
Perfect for my robot project
These LED modules are exactly what I needed for my Arduino robot. Bright and easy to wire.
Q: Can I use different colors on the same board?
A: Yes, you can mix and match different color modules on your project.
Q: Do I need an external resistor?
A: No, the module includes a built-in current-limiting resistor.
Q: What is the maximum voltage this module can handle?
A: We recommend operating between 3.3V and 5V. Higher voltages may damage the LED.
Q: Is this compatible with ESP8266?
A: Yes, it works perfectly with ESP8266 and ESP32 boards at 3.3V logic.
Q: Are jumper wires included in the package?
A: No, jumper wires are sold separately. The module comes with header pins installed.