Anonymous
Apr 09, 2026
Rating: 5/5
Perfect for Arduino Projects
Works flawlessly with my Uno. Easy to adjust sensitivity.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | DC 4.5V - 20V |
| Detection Distance | Up to 7 meters |
| Detection Angle | 100 degrees cone |
| Output Signal | 3.3V TTL High/Low |
| Delay Time | Adjustable 5s - 300s |
| Block Time | 2.5 seconds (default) |
| Dimensions | 32mm x 24mm x 18mm |
| Operating Temperature | -20°C to +80°C |
| Static Current | < 50uA |
| Trigger Mode | L (Low) / H (High) selectable |
Anonymous
Apr 09, 2026
Rating: 5/5
Perfect for Arduino Projects
Works flawlessly with my Uno. Easy to adjust sensitivity.
Anonymous
Mar 28, 2026
Rating: 3/5
Range varies with temperature
Noticed detection distance drops in warmer rooms. Otherwise okay.
Anonymous
Mar 21, 2026
Rating: 5/5
Reliable Motion Detection
Using this for a DIY security camera trigger. Very responsive.
Anonymous
Feb 27, 2026
Rating: 5/5
Great for Automatic Lighting
Connected to a relay module for my porch light. Saves energy.
Anonymous
Feb 08, 2026
Rating: 4/5
Good value but instructions vague
Sensor works well once wired correctly. Would like better pinout diagram.
Q: Does it work with Raspberry Pi?
A: Yes, but ensure logic level shifting if needed.
Q: Is this 5V compatible?
A: Yes, it operates between 4.5V and 20V.
Q: How do I adjust the delay?
A: Use the onboard potentiometer labeled Time.
Q: What is the output current?
A: The output can source/sink limited current, use a transistor for loads.
Q: Can it detect pets?
A: It detects heat motion, so larger pets may trigger it.