Anonymous
Apr 02, 2026
Rating: 4/5
Good value but sensitive
Had to adjust the sensitivity carefully because ambient light affected it slightly. Once tuned, it works well for the price.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Model Number | TCRT5000 |
| Operating Voltage | 3.3V - 5V DC |
| Detection Distance | 1mm - 8mm (Adjustable) |
| Output Signal | Digital Switching Output (0 and 1) |
| Comparator Chip | LM393 |
| PCB Dimensions | 32mm x 14mm |
| Mounting Hole Diameter | 3mm |
| Power Indicator | Red LED |
| Output Indicator | Green LED |
| Primary Application | Robot Car, Line Tracking, Obstacle Avoidance |
Anonymous
Apr 02, 2026
Rating: 4/5
Good value but sensitive
Had to adjust the sensitivity carefully because ambient light affected it slightly. Once tuned, it works well for the price.
Anonymous
Mar 15, 2026
Rating: 3/5
One sensor was faulty
Ordered a pack of five, but one did not light up. The others work fine. Contacted support for a replacement.
Anonymous
Feb 25, 2026
Rating: 5/5
Great for line following
Very responsive on black tape vs white surface. Exactly what I needed for my STEM project.
Anonymous
Feb 18, 2026
Rating: 5/5
Fast Shipping
Arrived well packaged and quickly. The soldering points are clear and easy to work with for beginners.
Anonymous
Jan 16, 2026
Rating: 5/5
Perfect for my Arduino Robot
Works exactly as described. I used three of these for a line-following robot and the response time is excellent. Easy to calibrate with the potentiometer.
Q: Does this work underwater?
A: No, this module is not waterproof and is designed for dry indoor or protected outdoor environments only.
Q: Can I adjust the detection range?
A: Absolutely. There is a blue potentiometer on the board that allows you to fine-tune the detection distance and sensitivity.
Q: Can it detect color differences?
A: It detects reflectivity differences rather than specific colors. It works best distinguishing between dark and light surfaces.
Q: What is the output logic level?
A: The output is a digital TTL signal. It outputs LOW when an obstacle or line is detected and HIGH when no object is detected.
Q: Is this compatible with 5V Arduino boards?
A: Yes, this module operates comfortably within the 3.3V to 5V range, making it fully compatible with standard Arduino boards like Uno and Nano.